The package comes with tamper-proof seals. Before opening it make sure that the seals have not been peeled off or broken. The seals will leave "VOID" marks on the package once peeled off (even partially) and will be considered as defective on arrival.

  • Check the seals and make sure they are NOT broken.

  1. Check the box seals [A] on each corner of the box.
    • Make sure that a tape is attached to each corner.
    • The surfaces of the tapes must be blank. If you see "VOID" on the tapes, do not install the components in the box.
  2. If the surfaces of the tapes do not show "VOID", remove them from the corners of the box.
  3. Once seals are peeled, "VOID" marks can be seen easily [B] and, they will not stick back to the package.