MP C6503/C8003, Pro C5200S/C5210S

Read This First

Expand All
  • Read This First
    • Revision History
      • Revision History (V1.10)
    • Symbols, Abbreviations
    • Trademarks
  • Product Information
    • Machine Codes and Peripherals Configuration
      • Pro C5200S/C5210S
        • Internal Options
        • EFI Options
      • MP C6503/C8003
        • Internal Options
    • Specifications
  • Installation
    • Installation Requirements
      • Environment
      • Minimum Space Requirements
      • Dimensions
        • Pro C5200S/C5210S
        • MP C6503/C8003
      • Power Requirements
        • Input voltage level (Pro C5200S/C5210S)
        • Input voltage level (MP C6503/C8003)
    • Main Machine Installation (Pro C5200S/C5210S)
      • Important Notice on Security Issues (Pro C5200S/C5210S)
      • Installation Flow Chart (Pro C5200S/C5210S)
      • Accessory Check (Pro C5200S/C5210S)
      • Installation Procedure (Pro C5200S/C5210S)
        • Unpacking the Machine
        • Attaching the ITB Separation Lever
        • Operation Panel Attachment
        • Operator Call Light Attachment
        • Storing the Supply Port Caps for the Developer
        • Storing the Factory SP Sheet
        • Attaching the decals
        • Machine Level Adjustment
        • Installing the Securing Bracket to Prevent the Power Cord from Falling Off
        • How to Set the Toner Cartridge
        • Executing DEMS
        • ACC (Automatic Color Calibration) Adjustment
        • Checking the Copy Image with the Color Chart
        • Paper Tray Settings
        • Paper Library Data Installation
      • Security Function Installation (Pro C5200S/C5210S)
      • Auto Remote Firmware Update (ARFU) Settings (Pro C5200S/C5210S)
        • Specifying the Time and Day of the Week to Prohibit Updating via Web Image Monitor
      • Moving the Machine (Pro C5200S/C5210S)
    • Main Machine Installation (MP C6503/C8003)
      • Important Notice on Security Issues (MP C6503/C8003)
      • Installation Flow Chart (MP C6503/C8003)
      • Accessory Check (MP C6503/C8003)
      • Installation Procedure (MP C6503/C8003)
        • Unpacking the Machine
        • Removing the ITB Retainer and Attaching the ITB Separation Lever
        • Storing the Factory SP Sheet
        • Attaching the decals
        • Machine Level Adjustment
        • Installing the Securing Bracket to Prevent the Power Cord from Falling Off
        • How to Set the Toner Cartridge
        • ACC (Automatic Color Calibration) Adjustment
        • Checking the copy image with the color chart
        • Paper Tray Settings
      • Security Function Installation (MP C6503/C8003)
      • Auto Remote Firmware Update (ARFU) Settings (MP C6503/C8003)
        • Specifying the Time and Day of the Week to Prohibit Updating via Web Image Monitor
      • Moving the Machine (MP C6503/C8003)
    • Smart Operation Panel Type S6 (D3C9) (Pro C5200S/C5210S Only)
      • Accessories
      • Installation Procedure
    • LCIT RT4020 (D709)
      • Accessories
      • Installation Procedure
        • Changing the Paper Size
        • Adjustment for the Rubber Foot Positions on the Rail
        • LCIT (D709) Tray Heater
          • Accessories
          • Installation
      • Image Adjustments: Side-to-side registration
    • LCIT RT4050 (D710)
      • Accessory Check
      • Installation Procedure
        • How to disconnect the LCIT from the main machine
      • Image Adjustments: Side-to-side registration
    • Banner Sheet Guide Tray for A3/11"x17" LCIT Type S6 (Pro C5200S/C5210S Only)
      • Accessory Check
      • Installation Procedure
    • A3/11"x17" Tray Unit Type M2 (D749)
      • Component List
      • Installation
    • Tab Sheet Holder Type M2 (D750)
      • Accessories
      • Installation
    • Banner Paper Guide Tray Type M26 (MP C6503/C8003 Only)
      • Accessories
      • Installation Procedure
    • 8 1/2" x 14" Paper Size Tray Type M2 (D745)
      • Component List
      • Installation Procedure
    • Multi Bypass Banner Sheet Tray Type S6 (Pro C5200S/C5210S Only)
      • Accessories
      • Installation Procedure
    • Cover Interposer Tray CI4040 (D3CN)
      • Accessories
      • Installation Procedure
        • Installation Procedure for Machines With a Finisher Installed
        • Prepare the Finisher
        • Shipping Tapes and Retainers
        • Prepare the Main Machine
        • Cover Interposer Tray
        • Extensions
        • Sponge Strip
        • Prepare the Main Machine (2)
        • Docking the Finisher
        • Finish the Installation
    • Cover Interposer Tray CI4020 (D712)
      • Accessories
      • Installation Procedure
        • Setting up the Unit and Docking to the Copier
        • Docking the Next Peripheral Device
        • Mounting the Tray Unit
    • Finisher SR4120/SR4130 (D3CG/D3CH)
      • Accessory Check
      • Installation Procedure
        • Tapes and Retainers
        • Preparing the Finisher
        • Preparing the Main Machine
        • Docking the Finisher
        • Checking the Installation
        • Auxiliary Trays
        • Using Auxiliary Trays
    • Punch Unit PU3060 (D706)
      • Accessory Check
      • Installation Procedure
    • SR4000 series Output Tray for Banner Sheet Type S6 (Pro C5200S/C5210S Only)
      • Accessory Check
      • Installation Procedure
        • Attaching the Banner Sheet Tray to the Finisher
        • SP Setting
    • Cooling Fan Unit Type M26
      • Accessory Check
      • Installation Procedure
        • Preparing the Main Machine (MP C6503/C8003 only)
        • Cooling Fan Unit Installation
      • Information for Cooling Fan Unit Type M26
    • Finisher SR4110 (D707) (MP C6503/C8003 Only)
      • Accessories
      • Installation Procedure
        • Docking the Finisher SR4110
        • Connecting the Finisher D707
        • How to Use the Spacer to Correct Paper Skew
      • SP Setting
    • Punch Unit PU5000 (B831) (MP C6503/C8003 Only)
      • Component Check
      • Installation Procedure
    • Cooling Fan Unit Type M31 (D770) (MP C6503/C8003 Only)
      • Component Check
      • Preparing the Main Machine
      • Cooling Fan Unit Installation
      • Information for Cooling Fan Unit Type M31
    • Booklet Finisher SR5080 (D3CA), Finisher SR5070 (D3CB) (Pro C5200S/C5210S Only)
      • Accessory Check
      • Installation Procedure
        • Ground Plate
        • Sponge Strips
        • Entrance Guide Plate
        • Shift Tray
        • Booklet Tray (Only for Booklet Finisher SR5080)
        • Docking to Upstream Units
        • Docking to the Cover Interposer Tray
        • Z-fold Support Tray Installation
        • Finishing the Installation
        • Horizontal/Vertical Skew Adjustment
    • Punch Unit PU5020 (Pro C5200S/C5210S Only)
      • Accessory Check
      • Installation Procedure
    • SR5000 series Output Tray for Banner Sheet Type S6 (Pro C5200S/C5210S Only)
      • Accessory Check
      • Installation Procedure
        • Attaching the Banner Sheet Tray to the Finisher
        • SP Setting
    • Output Jogger Unit Type M25 (D3CJ)
      • Component Check
      • Installation
    • Copy Tray Type M26 (D3D2)
      • Component Check
      • Installation Procedure
    • Decurl Unit DU5020 (D727) (Pro C5200S/C5210S Only)
      • Accessories
      • Installation Procedure
        • Connect the Downstream Peripheral Device
        • Paper Curl Adjustment When Decurl Unit DU5020 Connects with Finisher SR4120 or Booklet Finisher SR4130
    • Buffer Pass Unit Type S6 (D3D0) (Pro C5200S/C5210S Only)
      • Accessory Check
      • Installation
        • Removing the Entrance Guide
        • #01: When Connecting the Buffer Pass Unit with the Mainframe
        • #02: When Connecting the Buffer Pass Unit with the Decurl Unit DU5020 (D727)
        • Common Procedure
    • Multi-Folding Unit FD4000 (D615)
      • Accessories
      • Installation
        • Tapes
        • Paper Guide, Sponge Strip
        • Ground Plate
        • Docking
        • Power Cord
        • Height Adjustment
        • Removing Parts for the Cover Interposer Tray CI4020 (D712)
        • Proof Tray Auxiliary Plate
        • Detecting Paper Skew
        • Correcting Skew
        • Checking Side-to-Side Registration
        • Correcting Side-to-Side Registration
    • Mail Box CS4010 (D708)
      • Accessories
      • Installation Procedure
    • Scanner Heater
      • Accessories (Scanner Heater)
      • Installation (Scanner Heater)
    • Internal Options
      • List of Slots
    • Copy Connector Type M25 (D3D3)
      • Accessories
      • Installation
    • USB Device Server Option Type M19 (D3BC-28,-29) (MP C6503/C8003 Only)
      • Component Check
      • Installation Procedure
      • IP Address Setting
    • Extended USB Board Type M19 (D3BS-01)
      • Component Check
      • Installation Procedure
    • IEEE 1284 Interface Board Type M19 (D3C0)
      • Component List
      • Installation Procedure
    • IEEE802.11a/g/n Interface Unit Type M19 (D3BR-01)
      • Component List
      • Installation Procedure
        • Installing the Wireless LAN Board
        • Installing the Antenna
      • User Tool Settings for IEEE 802.11a/g/n
      • SP Mode Settings for IEEE 802.11 Wireless LAN
    • File Format Converter Type M19 (D3BR-04)
      • Component List
      • Installation Procedure
    • SD Card Appli Move
      • Overview
      • Move Exec
      • Undo Exec
      • Caution
    • PostScript3 Unit Type M26 (D3D8-05, -06, -07)
      • Accessories
      • Installation Procedure
    • OCR Unit Type M13 (D3AC-23, -24, -25)
      • Accessories
      • Searchable PDF Function Outline
      • Installation Procedure
      • Recovery Procedure
    • XPS Direct Print Option Type M26 (D3D8-24, -25, -26)
      • Accessories
      • Installation Procedure
    • IPDS Unit Type M6 (D3D8-20, -21, -22)
      • Accessories
      • Installation Procedure
    • DataOverwriteSecurity Unit Type M19 (D3BS03) (MP C6503/C8003 Only)
      • Overview
      • Component List
      • Before You Begin the Procedure
        • Seal Check and Removal
      • Installation Procedure
      • Configuring "Auto Erase Memory" (Performed by the Customer)
    • Optional Counter Interface Unit Type A (B870)
      • Component Check
      • Installation Procedure
    • NFC Card Reader Type S6 (D3DH-06) (Pro C5200/C5210 Only)
      • Accessory Check
      • Installation Procedure
    • NFC Card Reader Type M19 (D3BS-21) (MP C6503/C8003 Only)
      • Accessory Check
      • Installation Procedure
    • Smart Card Reader Built-in Unit Type S6 (D3DH-07) (Pro C5200/C5210 Only)
      • Accessory Check
      • Installation Procedure
    • Smart Card Reader Built-in Unit Type M19 (D3BS-22) (MP C6503/8003 Only)
      • Accessory Check
      • Installation Procedure
    • Common Adjustments
      • Height and Level Adjustment
        • Before you begin:
        • Setting the Leveling Shoes
      • Skew and Side-to-Side Registration
        • Checking Side-to-Side Registration
        • Correcting Side-to-Side Registration
        • Detecting Paper Skew
        • Correcting Skew
  • Preventive Maintenance
    • Preventive Maintenance Tables
    • PM Parts Settings
      • PM Parts Replacement Procedure
      • Preparation before Operation Check
        • Adjustment for the Nip Width of the Fusing Unit (Pro C5200S/C5210S only)
      • Operation Check
    • PM Counter Display
      • Note concerning Running Distance Data
      • Opening the PM Counter
      • PM Parts Screen Details
        • All PM Parts list: Main Menu
        • Number Button Sub Menu
        • Parts List for PM Yield Indicator: New Unit Set
        • Estimated Usage Ratio/Remaining Days
        • Commissioning Status Report Print
    • Cleaning Points
      • Scanner
        • Exposure Glass, ADF Exposure Glass, 1st Mirror, 2nd Mirror, 3rd Mirror, Original Size Sensors
      • Laser Unit
        • Toner shield glass
      • Developer
        • Development Unit
        • Doctor Gap
      • Toner Supply
        • Toner Supply Unit
      • ITB Unit
        • Rollers
        • ID Sensor
      • Fusing
        • Stripper Plates (Fusing/Pressure)
        • Fusing Entrance Guide
        • Thermistor (Fusing Belt)
        • Thermistor (Hot Roller Shaft) (ProC5100S/5110S Only)
        • Thermopile
      • Other
        • Development Intake Dust Filter
        • Pressure Roller Dust Filter (Pro C5200S/C5210S only)
        • Paper Transfer Belt Cooling Fan (Front) Dust Filter
      • Paper Feed
        • 1st to 4th Transport Rollers (Drive/Idle)
        • Registration Roller (Drive/Idle)
        • Relay Roller (Drive/Idle)
        • Bypass Relay Roller (Drive/Idle)
        • Registration Sensor
        • Relay Sensor
        • Paper Dust Collection Unit
      • Duplex
        • Heat Pipe Roller
        • Heat Pipe Drive Roller
        • Paper Exit Roller (Drive/Idle)
        • Inverter Feed Out Roller (Drive/Idle)
        • Inverter Exit Roller (Drive/Idle)
        • Paper Exit Relay Roller (Drive/Idle)
        • Inverter Feed In Roller (Drive/Idle)
        • Exit Transport Guide Plate (Upper/Middle/Left)
        • 1st to 4th Duplex Feed Rollers (Drive/Idle)
        • Duplex Exit Roller (Drive/Idle)
        • Transport Guide Plate (Upper/Lower)
        • Purge Guide Plate (Lower)
  • Replacement and Adjustment
    • Notes on the Main Power Switch
      • Push Switch
        • Characteristics of the Push Switch (DC Switch)
        • Shutdown Method
        • Forced Shutdown
    • Special Tools and Lubricants
    • Exterior Covers
      • Right Cover
        • Right Middle Front Cover (Pro C5200S/C5210S)
        • Right Middle Front Cover (MP C6503/C8003)
        • Right Middle Upper Cover (Pro C5200S/C5210S)
        • Right Middle Upper Cover (MP C6503/C8003)
        • Right Middle Rear Cover (Pro C5200S/C5210S)
        • Right Middle Rear Cover (MP C6503/C8003)
        • Right Lower Cover
      • Left Cover
        • Left Middle Cover
        • Left Lower Cover
      • Rear Cover
        • Rear Middle Cover
        • Rear Lower Cover
      • Upper Cover
        • Upper Front Cover (Pro C5200S/C5210S)
        • Upper Front Cover (MP C6503/C8003)
        • Upper Rear Cover (Small)
        • Upper Left Cover, Upper Right Cover
    • Operation Panel (Pro C5200S/C5210S)
      • When Using the Standard Operation Panel
        • Operation Panel Unit
        • LDCD
        • OPU, OPR
        • LCD
      • When Using the Smart Operation Panel
        • Operation Panel Unit
        • Internal Parts
    • Operation Panel (MP C6503/C8003)
      • Operation Panel Unit
      • Internal Parts
      • Adjustment of Screen Angle
    • Proximity Sensor (Human Detection Sensor)
    • ADF
      • ADF Removal
      • Adjustment after Replacing the ADF
        • CIS RGB Adjustment
        • Checking the vertical registration
        • Checking the horizontal registration
        • Checking the skew
        • Checking the magnification
        • Platen Adjustment
      • ADF Cover
        • ADF Front Cover
        • ADF Rear Cover
        • ADF Feed Cover
      • Original Feed Unit
      • Pick-up Roller, Transport Belt
      • ADF Separation Roller
      • Original Registration Sensor
      • Original Exit Sensor
      • ADF Control Board
      • Separation Sensor, Skew Correction Sensor
      • Original Width Sensors, Interval Sensor
      • Original Length Sensor (B5, A4, LG)
      • APS Feeler
      • ADF Lift-Up Interlock Switch, Lift-Up Sensor
      • Original Set Sensor
      • Original Length Sensor (A4/LT)
      • Bottom Plate HP Sensor
      • Bottom Plate Position Sensor
      • ADF Feed Cover Interlock Switch, Pick-up Roller HP Sensor
      • ADF Entrance Motor
      • ADF Scanning Motor
      • ADF Exit Motor
      • ADF Bottom Plate Lift Motor
      • ADF Pick-up Roller Lift Motor
      • ADF Transport Motor
      • ADF Feed Motor
      • CIS Unit
        • CIS Gray Balance Adjustment
      • CIS White Roller Cleaning
    • Scanner Unit
      • Exposure Glass
      • ADF Exposure Glass, Gap Sheet (MP C6503/C8003)
        • How to Remove the ADF Exposure Glass and the Gap Sheet
        • How to Attach the ADF Exposure Glass and the Gap Sheet
      • Modification Procedure for Original Transport
        • Replacing Parts of the ADF
        • Removing the Scanner Parts
      • Lens Block, Original Length Sensor
        • Adjustment after Replacing the Lens Block
      • Exposure Lamp (LED)
      • Scanner Drive Motor
      • Scanner Home Position Sensor
      • DF Position Sensor
      • Scanner Unit
      • Scanner Wire
        • Preparation for Replacing a Scanner Wire
        • Replacing the Scanner Wire
        • Preparation for Reassembling the Scanner Wire
        • Reassembling the Scanner Wire
      • Installing the Scanner Heater
        • Accessories
        • Installation
      • Magnification and Registration Adjustment
        • Sub Scan Magnification Adjustment
        • Sub Scan Registration Adjustment
        • Main Scan Registration Adjustment
    • Laser Unit
      • Before You Begin
        • Caution Decals
      • Laser Unit
        • Before Replacement
        • Replacement
        • Notes on Installation of a New Laser Unit
        • Adjustment after Laser Unit Replacement
      • Charge Roller Cleaning Roller Lift Solenoids (KCMY)
      • Laser Unit Cooling Fan (Right)
      • Laser Unit Cooling Fan (Left)
    • Toner Supply Unit
      • Toner Supply Unit Front Cover
      • Toner Supply Unit
      • ID Chip Connector Board (KCMY)
      • Toner Supply Unit Inner Cover
        • Attaching the Toner Supply Unit Inner Cover
      • Sub Hopper Unit (KCMY)
        • Adjustment after Sub Hopper Unit (KCMY) replacement
      • Toner End Sensor (KCMY)
      • Sub Hopper Motor (KCMY)
      • Toner Supply Board (TSB)
      • Toner Cartridge Guide
      • Toner Supply Motor (KCMY)
        • Applying Grease after Replacing the Toner Supply Motor
    • Drawer Unit
      • Layout (Motors)
        • Drawer Unit (Front)
        • Drawer Unit (Rear)
      • Layout (Boards)
      • Drawer Unit Cover
        • If the Drawer is Locked
      • DUB (Drawer Unit Board)
      • Curled Cord
      • Drawer Unit Connector
      • Drawer Set Sensor 1
      • Drawer Set Sensor 2
      • Drawer Unit Set Sensor
      • Drawer Unit Lock Sensor
      • Drawer Unit Flapper Sensor
      • Drawer LEDs (LED 1-3)
        • LED 1
        • LED 2
        • LED 3
      • Drawer Unit Lock Motor
      • Registration Motor
      • Exit Motor
      • Duplex Inverter Entrance Motor
      • Exit Inverter Motor
      • Duplex Transport Motor
      • Duplex Exit Motor
      • Cleaning Web Motor (Pro C5200S/C5210S only)
      • Cleaning Web Contact Motor (Pro C5200S/C5210S only)
      • Fusing Heat Pipe Cooling Fan
      • IH Coil Cooling Fan
      • Fusing Pressure Roller Intake Fan (Pro C5200S/C5210S only)
    • PCDU
      • Faceplate
      • Applying Grease to the Top Edge of the Drum Shaft
      • PCDU
        • Notes on Attaching the PCDU
      • Charge Roller Unit
      • Drum Cleaning Unit Removal
        • Notes on Replacing the Drum Cleaning Unit and Drum Cleaning Blade
      • OPC Drum
        • Attaching the New OPC Drum
      • Drum Cleaning Unit Internal Components
        • Separation of the Lubrication Unit and Cleaning Unit
        • Lubrication Unit
        • Cleaning Unit
        • Assembling the Cleaning Unit and Lubrication Unit with New Seals
      • Potential Sensor (KCMY)
    • Development Unit
      • Development Unit
      • Development Filter
      • Removing Old Developer
        • General
        • PART 1: Preparations for Developer Removal
        • PART 2: Developer Removal Procedure
      • Adding New Developer
        • Adding New Developer (Summary)
        • Adding New Developer and Adjustment
    • Image Transfer Belt (ITB) Unit
      • ITB Unit Removal
      • ITB Replacement
        • Lubrication after replacement
      • ID/MUSIC Sensors
      • ITB Home Position Sensor
      • Paper Transfer Belt Separation Sensor
      • ITB Lift (YMC) Sensor
      • Image Transfer Roller (K)
      • Image Transfer Roller (YMC)
      • ITB Bias Roller
      • Transfer Power Pack/Separation Power Pack
      • TDRB (Transfer Drive Relay Board)
      • Anti-condensation Heater
      • Paper Transfer Belt Separation Motor
      • AC Transfer Power Pack (Pro C5200S/C5210S Only)
      • ITB Motor
      • ITB Drive Shaft Gear, ITB Drive Shaft Encoder Sensor
      • ITB Driven Shaft Encoder Sensor
    • ITB Cleaning Unit
      • ITB Cleaning Unit
      • Bottom Cover
      • ITB Cleaning Blade
      • ITB Lubricant Brush
      • ITB Lubricant Bar
      • ITB Lubricant Blade
      • ITB Cleaning Unit Set Sensor
      • ITB Paper Dust Cleaning Brush Roller
      • Lubrication after Replacement
    • Paper Transfer Belt Unit
      • Paper Transfer Belt Unit
        • Applying Grease after Replacing the Paper Transfer Belt Unit
      • Adjustment of the Paper Transfer Belt Unit
        • Adjustment Procedure (Example: When replacing the paper transfer belt adjustment bracket)
      • Belt Unit
        • Belt Unit (MP C6503/C8003)
        • Belt Unit (Pro C5200S/C5210S)
      • Cleaning Blade
        • Cleaning Blade (MP C6503/C8003)
        • Cleaning Blade (Pro C5200S/C5210S)
      • Paper Transfer Lubricant Bar (Pro C5200S/C5210S Only)
      • Paper Transfer Lubrication Roller (Pro C5200S/C5210S Only)
      • Paper Transfer Belt Cooling Fan (Front)
      • Paper Transfer Belt Cooling Fan (Rear)
    • Tandem Tray
      • Left Tandem Tray, Right Tandem Tray
      • Feed Roller, Pick-up Roller and Separation Roller
      • Paper Feed Unit for Tray 1
      • Rear Fence Home Position Sensor, Left Tray Paper Sensor
      • Rear Fence Return Sensor
      • Paper Height Sensors 1-3, Tray Down Sensor, Right Tray Set Sensor
      • Rear End Fence Closed Sensor
      • End Fence Rear Solenoid
      • Left Tray Lock Solenoid
      • Rear Fence Drive Motor
      • 1st Tray Lift Motor
    • Paper Feed Section (Tray 2-3, Vertical Transport)
      • Paper Tray
        • Installing the Side Fence Support Plate (MP C6503/C8003)
      • Feed Roller, Pick-up Roller and Separation Roller
      • Paper Feed Unit
      • Pick-up Solenoid
      • Transport Sensor
      • Paper Feed Sensor
      • Paper Tray Upper Limit Sensor, Paper End Sensor
      • Vertical Transport LED
      • Paper Size Sensors
      • Paper Tray Set Sensors
      • Tray Pull-In Device
      • Paper Tray Lift Motor
      • Tray Heater
        • Upper Tray Heater
        • Lower Tray Heater
    • Bypass Tray Unit (Pro C5200S/C5210S)
      • Bypass Tray Unit Removal
        • Bypass Tray Unit Separation
      • Bypass Pick-up Roller, Bypass Feed Roller, Bypass Separation Roller
      • Bypass Tray Paper End Sensor
      • Bypass Paper Width Sensor
      • Bypass Paper Length Sensor
      • Bypass Tray Lower Limit Sensor
      • Bypass Tray Lift Motor
      • Bypass Tray Upper Limit Sensor, Bypass Paper Feed Sensor
      • Bypass Pick-up Solenoid
      • Bypass Tray Set Sensor
      • Bypass Tray LED
    • Bypass Tray Unit (MP C6503/C8003)
      • Bypass Tray Unit Removal
        • Bypass Tray Unit Separation
      • Bypass Pick-up Roller, Bypass Feed Roller, Bypass Separation Roller
      • Bypass Tray Paper End Sensor
      • Bypass Paper Width Sensor
      • Bypass Paper Length Sensor
      • Bypass Paper Feed Sensor
      • Bypass Pick-up Solenoid
      • Bypass Tray LED
    • Paper Relay and Registration Section
      • Registration Unit
      • Relay Unit
      • Registration Sensor
      • Paper Type Sensor
      • Relay Sensor
      • Bypass Tray Paper Type Sensor
    • Paper Transport Belt Unit
      • Separation Lever
      • Paper Transport Belt Unit
      • Paper Transport Belts
      • Paper Transport Belt Fans
      • Paper Transport Belt Sensor
      • Paper Transport Belt Unit Set Sensor
    • Fusing Unit
      • Screw List
      • Removing the Fusing Unit
      • Fusing Heat Pipe
      • Fusing Unit Cover
        • Fusing Front and Rear Covers
        • Entrance Drawer Cover
        • Exit Drawer Cover
        • Fusing Upper Cover
        • Fusing Stripper Plate Unit
      • Fusing Unit Plates
      • IH Coil Unit
      • Fusing Stripper Plate
        • Applying Grease after Replacing the Fusing Stripper Plate
        • Determine the type of the Fusing Stripper Plate
      • Separating the Fusing Unit
      • Heating Roller, Fusing Roller, Fusing Belt
      • Heating Roller Shaft, Flanges
      • Pressure Roller Stripper Plate
      • Pressure Roller Fusing Lamp
      • Pressure Roller
        • Notes on Installing the Pressure Roller
      • Applying Grease: Gears
      • Applying Grease: Bearings (Fusing Roller, Pressure Roller)
      • Thermistor (Fusing Belt)
      • Thermistor (Hot Roller Shaft)
      • Pressure Roller Sensor (Rear)
      • Pressure Roller Sensor (Front)
      • Thermopile (Pressure Roller)
      • Thermostat (Pressure Roller)
      • Fusing Paper Feed Sensor
        • Adjustment after replacing the fusing paper feed sensor
      • Fusing Cleaning Web Unit (Pro C5200S/C5210S Only)
      • Fusing Cleaning Web (Pro C5200S/C5210S Only)
      • Fusing Belt Smoothing Roller (Pro C5200S/C5210S Only)
      • Fusing Belt Smoothing Roller Contact Sensor (Pro C5200S/C5210S)
      • Cleaning Web Set Sensor (Pro C5200S/C5210S Only)
      • Cleaning Web End Sensor (Pro C5200S/C5210S Only)
      • Cleaning Web Contact Sensor (Pro C5200S/C5210S Only)
      • Fusing Entrance Sensor
      • Thermopile (Fusing Belt)
    • Paper Exit and Duplex Unit
      • Paper Exit Unit
      • Paper Exit Sensor
      • Paper Exit Relay Sensor
      • Inverter Exit Sensor
      • Inverter Feed-in Sensor
      • Inverter Feed-out Sensor
      • Inverter Junction Gate Home Position Sensor
      • Inverter Junction Gate Motor
      • Duplex Inverter Solenoid
      • Paper Exit Left Guide Plate Sensor
      • Paper Exit Upper Guide Plate Sensor
    • Duplex Unit
      • Purge Relay Sensor, Duplex Invert Sensor
      • Duplex Invert Solenoid
      • Duplex Unit Entrance Sensor
      • Duplex Unit Sensor 3
      • Duplex Unit Sensor 4
      • Duplex Exit Sensor
      • Horizontal Feed Guide Plate Open Sensor
      • Duplex Transport Home Position Sensor 1
      • Duplex Transport Home Position Sensor 2
      • Edge Detection Sensor Shift Motor
      • Edge Detection Unit
      • Edge Detection Sensor
      • Sensor Shift Home Position Switch
      • Duplex Transport Shift Motor 1
      • Duplex Transport Shift Motor 2
    • Paper Purge Unit
      • Paper Purge Unit
      • PCB: LSB
      • Push Switch
      • Duplex Inverter Motor
      • Purge Tray LED
      • Left Lower Door LED
      • Lower Guide Plate LED
    • Drive Unit
      • Layout (Motors)
        • Rear of the Machine (Top)
        • Rear of the Machine (Middle)
        • Rear of the Machine (Bottom)
        • Drawer Unit (Front)
        • Drawer Unit (Rear)
      • Drum Motor (KCMY) / Drum Encoder Sensor (KCMY)
        • Removing the Drive Exhaust Fan and the Potential Sensor Board
      • Drum Home Position Sensor (Pro C5200S/C5210S Only)
      • Drum Cleaning Motor (KCMY)
        • Applying Grease after Replacing the Drum Cleaning Motor
        • Removing the Drive Exhaust Fan and the Potential Sensor Board
      • Development Motor (KCMY)
        • Applying Grease after Replacing the Development Motor
        • Removing the Drive Exhaust Fan and the Potential Sensor Board
      • Development Roller Home Position Sensor (KCMY)
      • ITB Lift Motor
        • Applying Grease after Replacing the ITB Lift Motor
      • Paper Transfer Belt Motor, Paper Transfer Belt Encoder Sensors
        • Applying Grease after Replacing the Paper Transfer Belt Motor
      • Bypass Feed Motor, Relay Motor
      • Paper Feed Motors, Transport Motors
        • 1st Paper Feed Motor, 1st Transport Motor
        • Vertical Transport Motor
        • 2nd Paper Feed Motor, 2nd Transport Motor, 3rd Paper Feed Motor, 3rd Transport Motor
      • Fusing Drive Motor
        • Applying Grease after Replacing the Fusing Drive Motor
      • Fusing Release Motor
        • Removing the Fusing Release Motor
        • Removing the Fusing Belt Smoothing Roller Drive Motor and the Bracket
      • Waste Toner Collection Motor
        • Removing the Waste Toner Collection Motor
        • Applying Grease after Replacing the Waste Toner Collection Motor
        • Removing the Fusing Belt Smoothing Roller Drive Motor and the Bracket
      • Waste Toner Lock Sensor
      • Fusing Belt Smoothing Roller Drive Motor (Pro C5200S/C5210S)
      • Fusing Belt Smoothing Roller Contact Motor (Pro C5200S/C5210S)
    • Waste Toner Collection
      • Waste Toner Bottle
      • Waste Toner Bottle Unit
        • Installing the Relay Duct
      • Waste Toner Bottle Motor Sensor
      • Waste Toner Near Full Sensor
      • Waste Toner Bottle Set Sensor
      • Waste Toner Transport Motor
        • Apply Grease after Replacing the Waste Toner Transport Motor
      • Waste Toner Upper Transport
      • Waste Toner Vertical Transport
      • Waste Toner Lower Transport
    • Main Boards, and HDD Unit
      • Layout (Boards)
      • Controller Board
        • When installing the New Controller Board
      • HDD Unit
        • After Installing the New HDD Unit
        • Disposal of HDD Units
        • Reinstallation
      • BICU
        • When installing the new BICU
      • NVRAM Replacement Procedure
        • NVRAM on the Controller Board
        • NVRAM (EEPROM) on the BICU
      • IOB
        • When removing the motors that are behind the IOB
      • PFB
        • When removing the motors that are behind the PFB
      • IH Inverter
      • AC Drive Board
      • PSU1, PSU2
        • When removing the motors and sensors that are behind the PSU1 and PSU2
      • Potential Sensor Board
      • Combined High-Voltage Power Supply Board (Charge/Development) (KCMY)
        • Combined High-Voltage Power Supply Board (KC)
        • Combined High-Voltage Power Supply Board (MY)
      • Heater Switch
    • Fans and Filters
      • Layout (Fans)
      • Controller Exhaust Fan
      • Development Exhaust Fans (Right/Left)
      • Development Intake Fans (KCMY)
      • Drive Exhaust Fan
      • Fusing Exit Exhaust Fan
      • Fusing Pressure Roller Exhaust Fan (Pro C5200S/C5210S)
      • Heat Pipe Panel Exhaust Fan
      • Heat Pipe Panel Intake Fan
      • Paper Transfer Belt Fusing Exhaust Fan
      • ITB Motor Cooling Fan
      • Ozone Exhaust Fan
      • Duplex Exhaust Fans (Front/Middle/Rear)
      • IH Coil Power Cooling Fan
      • ITB Cleaning Intake Fan
      • ID Sensor Cleaning Fan
      • PSU Fans (Right/Left)
      • Layout (Filters)
      • Duplex Exhaust Ozone Filters
      • Ozone Filters (Large/Small)
      • Dust Filters (Large/Small)
      • Particulate Filters
      • Deodorizing Filters
    • Adjustment after Replacement
  • System Maintenance
    • Service Program Mode
      • Entering SP Mode
        • When using the smart operation panel
      • Exiting SP Mode
      • Types of SP Modes
        • SP Mode Button Summary
        • Switching Between SP Mode and Copy Mode for Test Printing
        • Selecting the Program Number
        • Service Mode Lock/Unlock
      • Remarks
        • Others
    • SP Tables
    • Firmware Update (SD Card)
      • Overview
      • Firmware Types
      • Procedure
        • Update procedure
      • Error Screens During Updating
    • Firmware Update (Remote Firmware Update)
      • RFU Performable Condition
    • Firmware Update (Smart Firmware Update)
      • Overview
      • Immediate Update
      • Update at the Next Visit (Reserve)
        • How to Set the Machine to Download Firmware Later (Reserve)
        • How to Check if the Firmware Downloaded with Reserve
        • How to Install Firmware Downloaded with Reserve
      • Update via SD card
    • Firmware Update (Auto Remote Firmware Update)
      • Overview
      • Downloading and Updating Process
        • Downloads the latest package
        • Judgement of ARFU
        • Update Process
        • Checking the ARFU Result
        • Checking the Result Using the Logging Data
      • Related SP
    • Updating JavaVM
      • Creating an SD Card for Updating
        • Updating Procedure
        • List of Error Messages
    • NVRAM Data Upload/Download
      • Uploading Content of NVRAM to an SD card
      • Downloading an SD Card to NVRAM
    • Address Book Upload/Download
      • Information List
      • Download
      • Upload
    • SMC List Card Save Function
      • Overview
        • SMC List Card Save
      • Procedure
      • File Names of the Saved SMC Lists
      • Error Messages
    • UP/SP Data Import/Export
      • UP Data Import/Export
        • Data that can be imported and exported
        • Data that cannot be imported or exported
        • Exporting Device Information
        • Importing Device Information
      • SP Data Import/Export
        • Data that can be imported and exported
        • Exporting Device Information
        • Importing Device Information
      • Possible solutions for import/export problems
    • Capturing the Device Logs
      • Overview
        • Security of the Operation Log
      • Retrieving the Device Logs via Operation Panel
        • Procedure for Retrieving the Device Log with SD Card
      • Retrieving the Device Logs via Web Image Monitor
    • Card Save Function
      • Overview
        • Card Save:
      • Procedure
      • Error Messages
  • Troubleshooting
    • Self-Diagnostic Mode
      • Service Call Conditions
      • SC Logging
      • SC Automatic Reboot
      • SC Manual Reboot
    • SC100 (Engine: Scanning)
    • SC200 (Engine: Image Writing)
    • SC300 (Engine: Charge, Development)
    • SC300 (Engine: Around the Drum)
    • SC300 (Engine: Transfer/Separation, Cleaning, etc.)
    • SC400 (Engine: Around the Drum)
    • SC400 (Engine: Transfer/Separation, Cleaning etc.)
    • SC500 (Engine: Paper transport 1: Paper Feed, Duplex, Transport)
    • SC500 (Engine: Paper Transport 2: Fusing, etc.)
    • SC500 (Engine: Paper Transport 3: Feed, Duplex, Transport, Fusing)
    • SC500 (Engine: Others)
    • SC600 (Engine: Communication and Others)
    • SC600 (Controller)
    • SC600 (Engine: System)
    • SC700 (Engine: Peripherals-1)
      • Troubleshooting for SC720-XX
    • SC700 (Engine: Peripherals-2)
    • SC800 (Controller)
    • SC900 (Controller)
    • SC900 (Engine: Others)
    • Jam Detection
      • Jam Displays
      • Removing Jammed Paper
      • Printer Engine Jam History
        • How to check
        • Display
      • Jam Codes and Position Codes
        • ADF
        • Main Machine
        • LCIT RT4020 (D709)
        • LCIT RT4050 (D710)
        • Finisher SR4120 (D3CG)
        • Booklet Finisher SR4130 (D3CH)
        • Finisher SR4110 (D707) (MP C6503/C8003 only)
        • Finisher SR5070 (D3CB) / Booklet Finisher SR5080 (D3CA) (Pro C5200S/C5210S only)
        • Multi Folding Unit FD4000 (D615)
        • Mail Box CS4010 (D708)
        • Cover Interposer Tray CI4040 (D3CN)
        • Cover Interposer Tray CI4020 (D712)
        • Decurl Unit DU5020 (D727) (Pro C5200S/C5210S only)
        • Buffer Pass Unit Type S6 (D3D0) (Pro C5200S/C5210S)
        • Plockmatic Bookletmaker
        • GBC Stream Punch
      • Sensor Locations
      • Paper Size Codes
    • Voltage of the Input Power Source
      • Checking the Voltage of the Input Power Source
      • Acquisition Control for Voltage of the Input Power Source
        • Components
        • Acquisition Control (During Normal Operation)
        • Acquisition Control (When an SC is Generated)
        • The Period of Time when the Voltage cannot be Acquired
    • Fan Defect Detection
      • Fan Locations and Fan SC
    • Blown Fuse Conditions
      • AC Drive Board
        • 100V
        • 200V
      • PSU
        • PSU1 (100V, 200V)
        • PSU2 (100V, 200V)
      • DUB
      • IH Inverter
      • Toner Supply Board (TSB)
      • BICU
      • IOB
      • PFB
      • TDRB
      • Operation Panel
        • OPR (Pro C5200S/C5210S: Standard Operation Panel)
    • LED Conditions
      • ADF Control Board
      • BICU
      • IOB
      • Toner Supply Board (TSB)
      • PFB
      • DUB
      • SDCU
      • Controller Board
    • NICE Function (Pro C5200S/C5210S)
      • How to Activate NICE
      • Reference Side Registration Adjustment
        • Preparation
        • Adjustment Procedure
      • Front and Back Registration Adjustment
        • Preparation
        • Adjustment Procedure
      • FR Density Adjustment
        • Preparation
        • Adjustment Procedure Using the Scanner
        • Adjustment Procedure Using the Spectrophotometer
      • Banding Analysis
        • Overview
        • Procedure
      • Shock-jitter Finder
        • Installing the Shock-jitter Finder
        • Updating the Shock-jitter Finder
        • Operation Procedure
    • Adjustment
      • Adjustment 001: ACC (Automatic Color Calibration)
        • Overview
        • Procedure
      • Adjustment 002: Manual Gamma Adjustment
        • Overview
        • Printer Mode Adjustment
        • Copier Mode Adjustment
      • Adjustment 003: Scanner Registration
        • Overview
        • Adjustment Procedure
      • Adjustment 004: ADF Registration
        • Overview
        • Adjustment Procedure
      • Adjustment 005: Registration
        • Overview
        • Cause
        • Contents
      • Adjustment 006: Fusing Nip Width Adjustment for Envelopes
        • Overview
        • Adjustment Procedure
      • Adjustment 007: Adjustments Required for Improved Glossiness
        • Overview
        • Adjustments Required for Improved Glossiness (Pro C5200S/C5210S)
        • Adjustments Required for Improved Glossiness (MP C6503/C8003)
      • Adjustment 008: Margin Adjustment
        • Overview
        • Margin adjustment
    • Image Quality
      • Definitions of Abnormal Images
        • Main classification: Points
        • Main classification: Lines
        • Main classification: Plane
      • Image Quality 001: Spots
        • Overview
        • Troubleshooting for colored spots (40mm or 189mm intervals)
        • Troubleshooting for White Spots in Low-Temperature, Low-Humidity Environments
        • Troubleshooting for White spots
        • Troubleshooting for White spots with toner cores
        • Troubleshooting for White, fish-shaped stains
        • Troubleshooting for random white spots on solid images casued by paper dust
      • Image Quality 002: Streaks
        • Overvew
        • Troubleshooting for vertical streaks caused by contact with the toner adhering to the guide plate
        • Troubleshooting for Horizontal White Streaks in Small Solid Black Areas
        • Troubleshooting for scratch marks
        • Troubleshooting for White Line along the Paper Feed Direction
      • Image Quality 003: Bands
        • Overview
        • Troubleshooting for Blurred Image at 189mm Intervals (OPC Drum Circumference)
        • Troubleshooting for banding at 2-3mm intervals
        • Troubleshooting for Banding at Random Intervals Caused by Lubricant Falling from the Drum Cleaning Unit
      • Image Quality 004: Non-Reproduction
        • Overview
        • Troubleshooting for Halo image
      • Image Quality 005: Unevenness
        • Overview
        • Troubleshooting for Vertical bands in halftone images
        • Troubleshooting for Uneven Density in the Area up to 85mm from the Trailing Edge
        • Troubleshooting for Grainy image
      • Image Quality 006: Toner Flaking Off
        • Troubleshooting for Blocking on the Paper Output Tray
    • Paper Transport
      • Paper Transport 001: Envelopes
        • Troubleshooting for Feed Direction Limitations Applied on Certain Types of Envelopes
    • Scanning
      • Scanning 001: Streaks
        • RGB Streaks with ADF Scan (MP C6503/C8003 only)
    • Other Problems
      • Other 001: Drawer Unit
        • Drawer Unit Lock Motor Emergency
      • Other 002: Paper Exit Section
        • J024/J074 when Feeding Thick Paper
        • Preventing Abnormal Sounds
      • Other 003: Correspondance Table for Adjustment Settings (Pro C5200S/C5210S)
        • Correspondence Table for Adjustment Settings for Operators and SP Mode
        • Correspondance Table for Adjustment Setting and SP Mode
      • Other 004: Correspondance Table for IMSS Settings (Pro C5200S/C5210S)
        • Correspondence Table for IMSS Settings and SP Mode
      • Other 005: SC
        • Troubleshooting for SC516 after Repeated J097
        • Troubleshooting SC 570-00 (fusing belt smoothing roller error)
      • Other 006: Jam
        • Troubleshooting for J098
    • Problems Related to Peripheral Devices
      • Peripherals 001: Finisher SR4120/SR4130
        • Troubleshooting for Jam at Proof Guide Plate
      • Peripherals 002: LCIT RT4050
        • Upper Limit Position Adjustment
      • Peripherals 003: LCIT RT4020 (Pro C5200S/C5210S, MP C8003 SP)
        • Upper Limit Position Adjustment
  • Detailed Descriptions
    • Guidance for Those Who are Familiar with Predecessor Products
    • Product Overview
      • Component Layout
        • Component Layout
        • Paper Paths
        • Drive Layout
      • Electrical Components
        • Scanner Unit
        • Laser Unit
        • PCDU
        • Toner Supply Unit
        • Image Transfer Belt Unit
        • Bypass Tray Unit
        • Paper Feed Section
        • Drawer Unit
        • Fusing Unit
        • Waste Toner Collection
        • Drive Unit
        • Fans
        • Main Boards
    • ADF
      • Mechanism Descriptions
        • General Specifications
        • Supported Original Sizes
        • Component Layout
        • Drive Components
      • Mechanism Details
        • Original Pick-up
        • Bottom Plate Lift
        • Skew Correction
        • Original Size Detection
        • Original Feed/Transport Mechanism
        • Duplex Scanning
        • Jam Detection
        • Abnormal Detection
    • Scanner
      • Mechanism Descriptions
        • Component Layout
        • Overview
      • Mechanism Details
        • Scanner
        • Drive
        • Original Size Detection
        • Original Sensor State
        • Original Transport from ADF
        • Dust Detection
        • Scan Point Shift
        • Anti-Condensation Heater
    • Laser Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • LD Unit Components
        • Writing with 40 Beams
        • LD Safety Switch
        • Line Scan
        • Thermal Control
    • Toner Supply
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Toner Filling
        • Toner Cartridge Drive
        • Sub Hopper
        • Toner Filling Timing
        • Toner Supply
        • Sub Hopper Drive
        • Toner Transport / Supply
        • Toner End / Near-end Control
        • Toner Cartridge Information Storage, Toner Cartridge Lock Detection
    • Drawer Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Lock Mechanism
        • Electrical Supply
    • PCDU
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Charge
        • PCDU Drive
        • Drum Cleaning
        • PPG-Drive
        • Lubricant End Detection
        • DEMS (Development Electric-field Modulation System)
    • Development Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Toner Supply System (Pre-mix Development System)
        • Agitation Method
        • Development Unit Drive
        • Development Bias
        • Toner Density
        • Developer Turnover
        • Dust Collection
        • Ventilation
    • Image Transfer Belt (ITB) Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
    • ITB Cleaning Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • ITB Cleaning Mechanism
    • Paper Transfer Belt Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Paper Transfer Belt Lift
        • Paper Transfer Belt Release
        • Paper Transfer Belt Cleaning
        • Paper Transfer Belt Drive
        • AC Transfer method (Pro C5200S/Pro C5210S only)
    • Paper Feed Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Bank
        • Tray Pull-in Mechanism
    • Vertical Transport
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
    • By-pass Tray Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
    • Paper Registration
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Registration
        • Paper Thickness, Double Feed Detection
    • Paper Transport Belt Unit
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Paper Transport Belt Attraction
        • Paper Transport Belt Unit Detection
    • Fusing Unit
      • Mechanism Descriptions
        • Component Layout
        • Electrical Components
        • Component Descriptions
      • Mechanism Details
        • Fusing Mechanism
        • Thermal Control
        • Fusing Unit Overheat Prevention
        • Fusing Drive
        • Rotation Detection
        • Pressure Mechanism
        • Fusing Nip-band Adjustment (Envelope)
        • Jam Detection
        • Cleaning Mechanism (Pro C5200S/C5210S)
        • Fusing Belt Smoothing Roller (Pro C5200S/C5210S only)
        • Fusing Heat-shutout / Cooling Mechanism
        • Pressure Roller Cooling (Pro C5200S/C5210S Only)
    • Paper Exit and Duplexing
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Transport Operation
        • Inverter, Paper Exit
        • Duplex
    • Paper Purge
      • Mechanism Descriptions
      • Mechanism Details
    • Waste Toner Collection
      • Mechanism Descriptions
        • Component Layout
      • Mechanism Details
        • Waste Toner Path
        • Waste Toner Bottle Transfer, Waste Toner Bottle Drive, Torque Detection Part
        • Sensor Detection
        • Notification Timing of the Waste Toner Full State
        • New Waste Toner Bottle Detection
        • Days Remaining Counter of the Waste Toner Bottle
        • PM Counter of the Waste Toner Bottle
    • Electrical Components
      • Mechanism Descriptions
        • Block Diagram
        • Board Location
        • Outline of Each Board
        • HDD Details (Memory Capacity for Stored Documents)
    • Image Processing
      • Mechanism Descriptions
        • Block Diagram
      • Mechanism Details
    • Process Control
      • Mechanism Descriptions
        • List of Process Control Acronyms
      • Components
        • Process Control Component Layout
        • Sensors for Potential Control
        • Sensors for Toner Supply
      • Initial Settings
        • Installation, Developer Replacement
        • Other Initial Settings
      • Process Control
        • Potential Control
        • Toner Supply Control
    • Others
      • Proximity Sensor (MP C6503/C8003 only)
        • Sensor Operation
        • User Tools
        • Related SC Codes
        • Related SP Codes
      • Energy Save
        • Energy Saver Timer (Weekly Timer)
        • Sleep Mode Timer
        • Fusing Unit Off Mode (Energy Saving)
        • Energy Saving Recovery Setting for Business Application
        • Recovery Time/Reduced Electrical Consumption
        • Power States of this Machine
        • Verification of Up Time for each Energy Saving State
        • Checking the Up time by Device State
      • Paper Removal Mechanism for Jam J058/J098
        • Paper Removing Control for Jammed Paper
        • Paper Removing Control for the Paper Other Than Jammed Paper
      • @Remote New Function (Auto Discovery)
        • Auto Discovery Function Settings
      • Firmware Update Method Using the Firmware Package