In the SP mode or IMSS, increase the fusing heat roller temperature until the desired glossiness is achieved.
SP1-984-XXX
Htg Roller Temp Setting
0 to 200 °C
IMSS setting #050
Fusing Temp
100 to 200 °C
- Do not set the temperature higher than 180°C.
- Following are possible side effects:
- Paper curls and jams
- Gloss streaks
- Blisters on coated paper
- Reduced gloss
- Make 50 copies in A4/LT SEF and check the results.
If the results are unsatisfactory, set the process speed to “Low” in the SP mode or IMSS.
SP1-986-XXX
“3” (default: 0)
IMSS setting #102:
Process Speed Setting
Paper thickness 1 to 5: “1” (default: 0)
55.8ppm
Paper thickness 6: “3” (default: 1)
- For the process speed adjustment to take effect, turn the machine power OFF and then ON.