1. Attach the decal [B] to the tab sheet holder [A].
  2. Check that the paper tray is not being used, and then pull the tray carefully out until it stops.

  3. Install the tab sheet holder on the end fence of the paper tray.

      • When the tab sheet holder is installed correctly, you can hear a clicking noise.
        • [A]: End fence
        • [B]: Tab sheet holder

  4. Load tab stock in the paper tray.

    • Load tab stock so that the side with the tab faces the tab sheet holder.

  5. Adjust the end fence position so that the tab sheet holder will fit the tab stock.
  6. Carefully slide the paper tray fully in.

    • When removing the tab stock holder, spread the hook [A] of the tab sheet holder and then remove it as shown below.