- Clean the place to attach the exposure glass seal on the exposure glass bracket with alcohol.
- Attach the exposure glass seal [C] so that the corner with the angle cut off aligns with the marking [B] on the exposure glass bracket [A].
- Peel off the release paper of the exposure glass seal.
Attach the ADF exposure glass [B], so that the edges of the ADF exposure glass touch the tabs [A] on the exposure glass bracket.
- Attach the ADF exposure glass, so that the marking [A] is on the upper left.
- Attach the ADF exposure glass, so that the marking [A] is on the upper left.
- Attach in the order of exposure glass, glass cover and rear scale.
- Clean the ADF exposure glass with a dry cloth.
- Peel off the release paper of the gap sheet.
Fit the gap sheet [C] to the indented part [A] of the glass cover so that the corner with the angle cut off is at the front [B].
- When replacing an ADF exposure glass, replace with a new exposure glass seal and a gap sheet as well.
- ADF Exposure Glass (Pro C5200S/C5210S): Same as for MP C6503/C8003, except there is no gap sheet.