It is necessary to apply the grease (KS660B) to the top edge of the drum shaft every 300K.

  • When you do not apply the grease to the shaft, it causes rust, and the faceplate and the PCDU may become stuck and not possible to pull out.
  • The PCDU must be installed when you do cleaning or apply the grease, because the drum shaft is weak and unstable without the PCDU in the machine.

  1. Remove the faceplate. (Faceplate)
  2. Wipe the top edge of the drum shaft [A] with a damp cloth.
  3. Apply the grease (KS660B) to the contact part of the faceplate bearings [A] as shown below.