1. Remove the fusing cleaning web unit. (Fusing Cleaning Web Unit (Pro C5200S/C5210S Only))

  2. Remove the cover [A] of the fusing cleaning web unit.

  3. Remove the bracket [A].
  4. Remove the bracket [A].
  5. Remove the gears [A] (x3) and bearings [B] (x2).
  6. Remove the gear [A] and bearing [B].
  7. Remove the bearing [A].
  8. Remove the bracket [A].
  9. Loosen the gear [A] with the hexagonal wrench, and then remove it.
  10. Remove the bracket [A].
  11. Remove the E-ring [A].
  12. Remove the feeler [A] and bearing [B].
  13. Remove the stay [A].

  14. Remove the ring [A].

    • When you re-install the ring, put the ring through the shaft with the protruding part [A] of the ring facing outside. Push the ring until it reaches the step [B] in the shaft.
    • When you re-install the shaft in the frame, put the concave part [A] of the ring over the hole [B] in the frame to insert the feeler.

  15. Remove the fusing cleaning web [A].