The paper, which causes a jam, is controlled according to the cause of the paper jam as follows.
J058 (Bypass Paper Feed Sensor: Lag Jam)
| Cause of the Paper Jam | Jammed Paper Movement |
|---|---|
| 1. The paper length is longer than the paper setting | The first sheet: Transfer to the purge unit After the second sheet: Stop inside the drawer unit |
| 2. The paper length is shorter than the paper setting | Transfer to the purge unit |
* When the leading edge of the paper has passed 30 to 40 mm short of the inverter junction gate by the straight through output, the paper stops inside the drawer unit.
J098 (Paper thickness error)
| Cause of the Paper Jam | Jammed Paper Movement |
|---|---|
| 1. The paper thickness is thicker or thinner than the paper setting | Transfer to the purge unit |
| 2. The paper thickness is above the maximum value*1 | Stop inside the drawer unit |
*1: The value set in SP1-318-001 and 002 (Paper Thick Detect Max Value: Coated Paper: Thick1-Thick9)