• If the customer uses the SD card on a PC, operation cannot be guaranteed.
  • The SD card from which you moved an application cannot be used again.
  • The SD card itself is the proof of purchase. Therefore, the application must be purchased again if the card is lost.
  • Follow the procedure below to store the SD card from which you moved an application in the machine.

  • If the SD card is lost, it will be impossible to determine which application has been installed in the case of a machine failure.
  • Also, the empty SD card will required when moving back an application.

  1. Pull out the tandem tray [A] and remove the paper cassette decal [B].
  2. Remove the factory SP sheet [A].
  3. Remove the SD card holder [A] ( x 1).
  4. Set the SD card in the SD card holder.