1. Remove the right lower cover of the machine exterior. (Right Lower Cover)
  2. Pull out paper trays 1 and 2.
  3. Remove the right side of paper tray 1 [A].*

    * Pro C5200S/C5210S use TCRU/ORU screws
  4. Remove the vertical transport unit [A].
  5. Remove the paper guide plate for tray 2 [A].
  6. Remove the paper feed unit for tray 2 [A].
  7. Remove the LED cover [A].
  8. Remove the vertical transport LED [B] along with the bracket.
  9. Remove the relay cover [A].
  10. Remove the 5 sensors [A] along with the bracket, located inside the rear face of the machine.
  11. Remove the paper height sensors 1, 2, 3 [A], tray down sensor [B] and right tray set sensor [C].