1. Plug in the power cord, and then turn ON the main power switch.

  2. Enter the SP mode, and note the following SP values.

    • SP2-104-040 (Skew Adjustment: Manual: K: CE)
    • SP2-104-041 (Skew Adjustment: Manual: K: User)
    • SP2-104-002 (Skew Adjustment: Manual: C)
    • SP2-104-003 (Skew Adjustment: Manual: M)
    • SP2-104-004 (Skew Adjustment: Manual: Y)
  3. Set the following SP values to "0".
    • SP2-104-040 (Skew Adjustment: Manual: K: CE)
    • SP2-104-041 (Skew Adjustment: Manual: K: User)
    • SP2-104-002 (Skew Adjustment: Manual: C)
    • SP2-104-003 (Skew Adjustment: Manual: M)
    • SP2-104-004 (Skew Adjustment: Manual: Y)

    • If you do not do the above adjustment, MUSIC may not work. This is because one or more of the motors may be at or near the upper or lower limit (± 100). In such a case, if you do not zero the motor positions before MUSIC is done, the range that the motor can move will be restricted and the adjustment may not be done correctly.

  4. Enter the SP mode, and set the following SPs.
    • SP2-102-001 (Magnification Adjustment: Main Mag.: K): set to "123" (for the CK laser unit)
    • SP2-102-007 (Magnification Adjustment: Main Mag.: M): set to "123" (for the YM laser unit)
    • SP2-102-016 (Magnification Adjustment: Main/Sub: K): set to "0"
    • SP2-102-019 (Magnification Adjustment: Main/Sub: C): set to "0"
    • SP2-102-022 (Magnification Adjustment: Main/Sub: M): set to "0"
    • SP2-102-025 (Magnification Adjustment: Main/Sub: Y): set to "0"

    • For the Magnification Adjustment values of SP2-102-001/007, set to "123" only for the color of the new laser unit.
    • For the Magnification Adjustment values of SP2-102-016 through 025, set to "0" only for the color of the new laser unit.