In the SP mode, there is a management screen for the PM counter.

  1. Enter the SP mode.

  2. Press [PM Counter/New Unit Set].

  3. Select the item you want to configure.


    [1] All PM Parts List: New Unit Set

    Displays all PM items (all PM items, not only PM units). Lists all PM items regardless of PM yield indicator settings.

    [2] Parts List for PM yield indicator: New Unit Set

    Displays only the items with their PM yield indicator settings set to "Yes".

    [3] Clear all PM settings

    Resets all PM counter settings to "0" at the same time. PM items can be reset one by one in the "All PM Parts List: New Unit Set" menu.

    [4] Counterlist print out

    Prints the PM counter on paper.

    [5] Estimated usage ratio/Remain Days: New Unit Set

    Displays the estimated usage ratio (0 to 100%) and remaining days (255 to 0 days) of the PM items, in which the calculation is based on page counter value and running distance, allowing more accuracy in comparison to the conventional PM page counter.

    [6] Commissioning Status Report Print

    Prints the status report.