• SD card can be inserted with the machine power off.
  • During the updating process, do not turn off the power.
  • If you turn off the power during the updating, the machine performance is not guaranteed. (There is a possibility that an SC and boot failure occurs.)
  • If you accidentally turn off the power during the updating, retry the updating procedure from the beginning. (If the update fails again, you will need to replace the controller board.)

  1. If the boot priority application is set to the ESA application, switch to the copy application from "Function Priority".
    • Pro C5200S/C5210S:
      • When using the standard operation panel: Press the "User Tools" key. -> "System Settings" -> "General Features" -> "Function Priority"
      • When using the smart operation panel: Press the "User Tools" icon. -> "Screen Features" -> "SYSTEM" -> "Screen Device Settings" -> "Function Priority"
    • MP C6503/C8003: Press the "User Tools" icon. -> "Screen Features" -> "SYSTEM" -> "Screen Device Settings" -> "Function Priority"
  2. Insert the SD card you created into the service slot, and then turn ON the main power switch.
  3. Take a note of the current Heap size from Web Image Monitor. ("Extended Feature Settings" -> "Administrator Tools" -> "Heap Size")
    You can check the Heap size after updating.
  4. Turn OFF the main power.
  5. Insert the SD card for update into the service slot.
  6. Turn ON the main power.
  7. After booting Java VM, update of the application is started. "Updating SDK/J" appears in the banner message of the touch panel display. (Estimated time: about 2 minutes)
  8. After completing the update and starting the Java VM, "Update SDK / J done SUCCESS" appear in the banner message of the touch panel display. After turning off the power, remove the SD card from the slot.
    When you fail to update, "Update SDK/J done FAIL" is displayed. You can confirm the cause of the error message below.
  9. Turn ON the main power.
  10. Reconfigure the Heap size from Web Image Monitor. ("Extended Feature Settings" -> "Administrator Tools" -> "Heap Size")
    See the manual for the ESA application to know what value to set for the heap size.
  11. Return to the previous setting for the boot priority application.