Check the accessories and their quantities against this list.
Description | Q'ty | |
|---|---|---|
1. | Side Tray | 1 |
2. | Sponge Strip | 1 |
3. | Ground Plate | 1 |
4. | Entrance Guide Plate | 1 |
5. | Joint Bracket | 1 |
6. | Shift Tray | 4 |
7. | Support Plate | 1 |
8. | Support Plate Pocket | 1 |
9. | Tapping Screws – M3 x 6 | 2 |
10. | Tapping Screws – M3 x 8 | 4 |
11. | Tapping Screws – M4 x 8 | 2 |
12. | Screws – M4 x 14 | 4 |
13. | Screws – M4 x 20 | 4 |
14. | Leveling Shoes | 4 |
15. | Support Plate for Shift Tray | 1 |
16. | Coupling Seal | 1 |
17. | Support Plate for Proof Tray | 1 |
- The output jogger unit is pre-installed on this finisher, so it is not an option.
Spacer
A spacer for correcting paper skew is attached to the bottom right of the finisher.
[A]: Spacer for skew correction and side-to-side registration adjustment