Moving the Machine (MP C6503/C8003)

Turn OFF the main power switch, and then unplug the power cable from the main machine.
Close all the doors and trays that can be opened and closed, and then secure them in place with shipping tape.
Make sure to follow all the precautions listed below when moving the machine. This is to prevent the machine from being damaged and the drawer unit from coming out.
- Do not put a load on the ADF
- When moving the machine, push the machine instead of pulling the machine. Pulling the machine may cause damage of the covers.
- When pushing the machine, push the upper side of the machine in the areas marked with red rectangles below. If you move the machine over an uneven surface, insert your hands under the machine at the places marked with red rectangles below, and then lift the machine slightly to get over the uneven surface.
- When you move the machine, face the left or right side of the machine toward the direction of movement. Then, push the machine forward at a slow walking speed. Go slower if there are any uneven areas on the floor.
- However, if you cannot face the left or right side forward, move the machine with the front side facing forward (in the direction you are moving).
- Do not face the rear side of the machine toward the direction of movement. This is because if the floor is inclined upward, the trays and drawer unit may come out.
  - Do not push or lift the location marked with red rectangles below. You may damage the machine.
  - After transporting the machine, the load on the front part of the machine may cause the drawer unit to become stuck, making it impossible to draw it out.
    [A] (Normal): When the drawer unit is pulled, the lock mechanism is lifted and the drawer unit is unlocked.
    [B] (Abnormal): The drawer unit is stuck.
    If the drawer unit is stuck, push the drawer unit in and try pulling it out again.
    Also, please note that when the power is turned ON, the drawer unit will be pulled in automatically, and this will solve the problem.