- Do this procedure near each caster where an adjustable bolt is provided.
- The number of leveling shoes will differ, depending on which unit you are leveling.
Turn the lower nut to lower the bolt.
- The upper bolt is spot-welded to the frame and does not move.
Set a leveling shoe below the bolt.
Continue to turn the lower nut until it stops against the shoe.
Set a level on the front, rear, and side edges to determine if the unit is level.
Adjust the height at each corner until the unit is level.
Check the results of the adjustments.
- The tops of the peripheral units on the left where the units are joined must be at the same height.
Pro C5200S/C5210S
MP C6503/C8003 - Make sure that the plate at the paper exit on the left side of the main machine [A] moves freely and is not bent. It must be able to move to handle thick paper.
Between the right side [B] of the main machine and the LCIT, make sure that the LCIT guide plate moves freely and does not interfere with the main machine guide plate.
- The tops of the peripheral units on the left where the units are joined must be at the same height.