1. Use the Trimming Area Pattern (SP2-109-003, No. 14) to print the test pattern.
  2. Go to SP1-003-007 (Side-to-Side Reg: LCIT).
  3. Load paper (A4 LEF) in the LCIT tray, and then copy a couple of sheets.
  4. Enter the value in SP1-003-007 to adjust the blank margin [A] to 2 mm.
    The default value of the SP is 0 mm. Press [+] to increase the margin, and press [-] to reduce it. You can adjust the value in 0.1 mm intervals.
  5. Exit the SP mode.