1. Peel off the release paper of the magnetic plate [A].
  2. Press the spring [B] of the magnetic plate [A] against the metal part [D] of the bypass cover [C] to make a ground connection.
  3. Attach the magnetic plate [A] to the bypass cover.
  4. Put the paper feed tray assembly [A] on the bypass tray.
  5. Loosen the screws of the paper feed tray assembly [A].
  6. Put the bosses in the holes [B] of the counter plate [A].
  7. Fix the paper feed tray assembly [A].
  8. Remove the hinge [A].
  9. Attach the grounding plate [A].
  10. Attach the hinge [A].
  11. Make two screw holes in the right middle upper cover [A] with a screwdriver or drill.
  12. Remove the cover [A] of the damper assembly.
  13. Attach the damper assembly [A]. ([B]: M4×20, [C]: M4×14)
  14. Close the paper feed tray, so that it is held closed by the magnetic catch.
  15. Pull the ring [A] of the damper assembly, and put it in the hole [B] in the paper feed tray assembly.
  16. Attach the cover [A].