1. Unpack the machine and remove all the wrapping.
  2. Place the machine at the installation site.
  3. Remove all filament tape from the machine.
  4. Remove the filament tape and the cushion at the ADF.
  5. Open the feed cover [A] and remove the protection sheet.
  6. Open the ADF [A] and release the lever to open the white board. Then remove the protection sheet.
  7. Open the tandem tray [A] and remove the filament tape at the duplex unit [B].
  8. Remove the power cable from paper tray 2.
  9. Remove the operation panel from paper tray 3.