Contents

Step 1. Side fence check

Step 2. Skew Adjustment for front and back.

Step 3. Image Adjustment for front.

Step 4. Image Adjustment for back.

Step 5. Adjustment of magnification for back.

Step 1. Side fence check

Check the side fence status for each paper tray. If not correct, adjust the trays.

Step 2. Skew Adjustment for front and back.

Step 2-1 Set A3 or DLT plain paper (63.1-80.0 gsm) in Tray 2 and apply the paper tray settings.

Step 2-2 Print 5 copies of the test pattern Trimming Area (SP2109-003-14) in b/w and simplex.

Step 2-3 Measure the two locations [A] and [B] on all 5 copies.

Step 2-4 You need to make an adjustment with SP1-004-001 so that the average values of [A] and [B] are the same.

Front Side (1st Side)

Note: The arrow indicates the paper feed direction

Step 2-5 Make another 5 copies, this time in duplex.

Step 2-6 Measure the locations [C] and [D] on the back side.

Step 2-7 You need to make an adjustment with SP1-004-003 so that the average values of [C] and [D] are the same.

Back Side (2nd Side)

Note: The arrow indicates the paper feed direction

Step 3. Image Adjustment for front

Step 3-1 Set A3 or DLT plain paper (63.1-80.0 gsm) in Tray 2 and apply the tray paper settings.

Step 3-2 Print 5 copies of the test pattern Trimming Area (SP2-109-003-14) in b/w, simplex.

Step 3-3 Measure the distance [A] and [B] on all 5 copies and calculate the average.

Step 3-4 You need to make an adjustment with SP1-003-XXX so that the average values of [A] and [B] are the same. Refer to ‘Reference Information-2’ below.

(You can make an adjustment for each paper type with SP1-003-008 to 016 for IMSS setting in the Pro machine.)

Step 3-5 You need to make an adjustment with SP1-001-XXX so that the average values of [A] and [B] are the same. Refer to ‘Reference Information-2’ below.

(You can make an adjustment for each paper type with SP1-001-004 to 016 for IMSS setting in the Pro machine.)

Step 3-6 If you finished the adjustment, check that the value of [C] is more than 4mm.

Note: The arrow indicates the paper feed direction

Step 4. Image Adjustment for back

Step 4-1 Print 11 copies of the test pattern Trimming Area (SP2-109-003-14) in b/w, duplex, and select 5 copies (from the 4th to the 8th copy) from among the 11.

Step 4-2 Measure the distances [A2], [B2], [C2] and [D2] on all 5 copies and calculate the average.

Note: The arrow indicates the paper feed direction

Solid line: Trimming area 1st side

Dashed line: Trimming area 2nd side

Step 4-3 You need to make an adjustment with SP1-003-006 so that the average values of [A2] and [B2] are the same. Refer to ‘Reference Information-3’ below.

(You can make an adjustment for each paper type with SP1-003-008 to 016 for IMSS setting in a Pro machine.)

Step 4-4 You need to make an adjustment with SP1-001-003 so that the average values of [C2] and [D2] are the same. Refer to ‘Reference Information-3’ below.

(You can make an adjustment for each paper type with SP1-001-004 to 016 for IMSS setting in a Pro machine.)

Step 5. Adjustment of magnification for back.

Step 5-1 Set A3 or DLT plain paper (63.1-80.0 gsm) in Tray 2 and apply the tray paper settings.

Step 5-2 Print 5 copies of the test pattern Trimming Area (SP2109-003-14) in b/w, Duplex.

Step 5-3 Measure the distance [A] and [B] on all 5 copies and calculate the average.

Step 5-4 You need to make an adjustment with SP2-102-043 so that the average values of [A3] and [B3] are the same. Refer to ‘Reference Information-4’ below.

(You can make an adjustment for each paper type with SP2-102-043 for IMSS setting in a Pro machine.)

Step 5-5 You need to make an adjustment with SP2-102-006 to 069 so that the average values of [C3] and [D3] are the same. Refer to ‘Reference Information-4’ below.

(You can make an adjustment for each paper type with SP2-102-006 to 069 for IMSS setting in a Pro machine.)

Reference Information-1 (Step 2. Skew adjustment for front and back)

1. Check the SP value for the tray being used.
2. Increase the value of the SP by 1 mm.
   
   1. Example: If the current value is 1 mm, input 2 mm into the SP.

3. Print out.
   If you can’t solve the skew, repeat steps 1 to 3.

   Pro/Office	Number	Description	Adjustment area
   SP	SP1-004-001	Reg buckle Adj(Tray 1,2,3,4)	±5.0mm
   SP	SP1-004-003	Reg buckle Adj(Duplex)	±5.0mm

Reference Information-2 (Step 3. Image Adjustment for front)

Side-to-Side Registration

1. Do the following calculation: ((average [B] - (average [A])/2 = X

2. Add X to the current values in SP1003. (If you use IMSS, SP1003-008 to 016)

   SP1003 Side-to-Side Reg	Current SP Value	X	Modified Value
   Tray 1
   Tray 2
   Duplex Tray
   A3LCT Tray 3
   A3LCT Tray 4
   A3LCT Tray 5
   Bypass Tray

   Examples

   SP1003 Side-to-Side Reg	Current SP Value	X	Modified Value
   Example 1.	1.0	0.1	1.1
   Example 2.	1.0	-0.2	0.8

   Pro/Office	Number	Description	Adjustment Area
   SP	SP1-003-XXX	Side-to-Side Reg	SP1-003-001 to 015 ±4.0mm SP1-003-016 ±9.0mm SP1-003-017 to 022 ±3.0mm

   [For IMSS]

   Pro	Number	Description	Adjustment Area
   IMSS	001	Image Position: Across Feed: Side 1	±3.0mm
   SP	SP1-003-008 to 016	Side-to-Side Reg (for each paper thickness)	SP1-003-008 to 015 ±4.0mm SP1-003-016 ±9.0mm

Lead Edge Registration

1. Do the following calculation: ((average [C] - (average [D])/2 = Y

2. Add Y to the current values in SP1001. If you use IMSS, SP1-001-004 to 016

   SP1001 Side-to-Side Reg	Current SP Value	X	Modified Value
   Tray 1
   Tray 2
   Duplex Tray
   A3LCT Tray 3
   A3LCT Tray 4
   A3LCT Tray 5
   Bypass Tray

   Pro/Office	Number	Description	Adjustment Area
   SP	SP1-001-XXX	Lead Edge Reg (Each trays)	±9.0mm

   [For IMSS]

   Pro	Number	Description	Adjustment Area
   IMSS	003	Image Position: With Feed: Side 1 (for each Custom Papers)	±3.0mm
   SP	SP1-001-004 to 016	Lead Edge Reg (for each paper thickness)	±9.0mm

Reference Information-3 (Step 4. Image Adjustment for back)

1. Do the following calculation:
   (average [B2] - (average [A2])/2 = x
   (average [C2]) - (average [D2])/2 = y
2. Make an adjustment in the same way as front image position adjustment.

3. Make a print out and check it.
   If you can’t solve the magnification problem, repeat steps 1 to 3.

   Pro/Office	Number	Description	Adjustment Area
   SP	SP1-003-006	Side-to-Side Reg (Duplex)	±3.0mm
   SP	SP1-001-003	Lead Edge Reg (Duplex)	±9.0mm

   For IMSS

   Pro	Number	Description	Adjustment Area
   IMSS	002	Image Position: Across Feed: Side 2 (for each Custom Papers)	±3.0mm
   IMSS	004	Image Position: With Feed: Side 2 (for each Custom Papers)	±3.0mm
   SP	SP1-003-008 to 016	Side-to-Side Reg (for each paper thickness)	SP1-003-008 to 015 ±4.0mm SP1-003-016 ±9.0mm
   SP	SP1-001-004 to 016	Lead Edge Reg (for each paper thickness)	±9.0mm

Reference Information-4 (Step 5. Adjustment of magnification for back)

1. Do the following calculation:
   average [A3]/average [B3]-1 = A
   average [C3]/average [D3]-1 = C
2. Add A to the current values in SP2102-043.
3. Add C to the current values in SP2102-061 to 069.

4. Make a print out and check it.
   If you can’t solve the magnification problem, repeat steps 1 to 4.

   Pro/Office	Number	Description	Adjustment Area
   SP	SP2-102-043	Verso Main Meg set& Adj	-0.5 to 0.3%
   SP	SP2-102-061 to 069	Verso Sub Mag T1-T9	±0.5%

   For IMSS

   Pro	Number	Description	Adjustment Area
   IMSS	006	Magnification: Across Feed: Side 2 (for each Custom Papers)	-0.5 to 0.3%
   IMSS	008	Magnification: With Feed: Side 2 (for each Custom Papers)	±0.5%
   SP	SP2-102-043	Verso Main Meg set& Adj (for each paper type/thickness)	±0.5%
   SP	SP2-102-061 to 069	Verso Sub Mag T1-T9 (for each paper type/thickness)	±0.5%

   

   • Adjustment step is 0.025%