Preparation

Take note of the following points before you begin the adjustment.

• Check if the uneven density can be corrected with "Adjust Density Difference Across Feed Direction" in the Adjustment Settings for Skilled Operators menu. The adjustments made in this menu take effect only after power cycling the machine. If there is no improvement, set the value(s) back to "0" and turn the main power off/on.
• Replace parts exceeding life, if any.
• Clean the dust shield glass of the laser unit.
• Clean the doctor gap.
• For adjustments using the scanner, unzip the installer zip file: "NICE ImageView FR V2.1 Installer.7z" and run "set up .exe". DO NOT apply changes to the file directory.
• For adjustments using the spectrophotometer, run "i1ProfilerSetup.exe" and install "i1 Profiler."
• Prepare A3 or DLT size coated paper.