Do SP5-832-001 to format the hard disk.
Do SP5-853-001 to copy the preset stamp data from the firmware to the hard disk.
Do SP5-846-052 to copy back the address book to the hard disk from the SD card to which you have already copied the address book data if possible.
Turn the main power switch off/on.
- Make sure the cables are correctly connected on the controller board.
Red cable: Upper socket
Blue cable: Lower socket - If the connections are reversed, the machine will issue an error at startup. If it occurs just reconnect the HDD correctly and start again. The HDD will not be damaged by such an incorrect startup.
- Make sure the cables are correctly connected on the controller board.