Do the following steps.

  1. Plug in the power cord, and then turn ON the main power switch.

  2. Execute the following SPs to download the correction values from the new laser unit.

    • SP2-108-1: (Image Parameter: K/C Writing Unit)
    • SP2-108-2: (Image Parameter: Y/M Writing Unit)

    • During the download of the correction values, you can turn off the power, or open the door.
    • If an SC or a display of "failure" occurs, you can run the download again after turning the power OFF and ON.

  3. Correct the color registration with the User Tools.
    • HOME screen [User Tools]-[Machine Features]-[Maintenance]-[Color Registration]-[OK]
  4. If necessary, adjust the registration, skew, and magnification. For information about how to adjust, refer to Adjustment in Troubleshooting.