1. Use the long screws to loosely attach the connecting bracket [A] to the left side of the main machine. Do not tighten these screws.
  2. With the connecting bracket floating freely on the loose screws, move the bracket to position screw [B] so that it is centered exactly below the long line on the scale. Then tighten the four screws.
  3. Peel the tape from the coupling seal, and then attach it to the left side of the main machine between the exit rollers.
  4. Remove the connector cover [A] on the rear left side of the main machine.
  5. Push the finisher close to the left side of the main machine.