- When you have replaced the ITB unit, you must adjust the paper transfer belt unit. (Adjustment of the Paper Transfer Belt Unit)
- Remove the ITB cleaning unit. (ITB Cleaning Unit)
- Remove the faceplate. (Faceplate)
- Remove the bracket [A].
- Check that the image transfer rollers (YMC) do not contact the transfer belt. You can check it with the lever shown in the picture below. The lever indicates either “HP” or “O” depending on the state of the image transfer rollers.
- HP: Image transfer rollers contact the ITB.
- O: Image transfer rollers are detached from the ITB.
Pull the drawer unit. Then pull the ITB unit [A] out to detach it.
- When you remove or install the ITB unit, be sure not to let the transfer belt touch the drawer unit.
- Be sure to place the ITB unit on a flat surface.
- Execute SP2-924-004 after you remove and re-install the ITB unit.