1. Open the front door of the finisher.
  2. Pull out the locking lever [A].
  3. Align the finisher [B] with the connecting brackets [C], then slowly push the finisher onto the brackets.
  4. Connect the finisher cable [D] to the copier
  5. Push in the locking lever. [A]
  6. Check that the top edges of the finisher are parallel with the edges of the device (or the copier) to the right.
  7. Fasten the locking lever [A].
  8. Close the front door.
  9. Set the leveling shoes [A] under the feet.
  10. Turn the nuts to adjust the height of the finisher until it is level.