• Unplug the machine power cord before starting the following procedure.
  • Do the following procedure not to damage any harnesses.
  • Check that all harnesses are not damaged nor pinched after installation.

  1. Exposure Glass (Exposure Glass)
  2. Left middle cover (Left Middle Cover)
  3. First, turn the gear [A] and move the 1st scanner carriage [B] next to the lens cover [C].
  4. Pass the scanner heater [A] under the 2nd carriage [B]. Then insert the connector [C] from the left side of the scanner unit [D].

  5. Attach the scanner heater [A] ( x 2).

      • The screw on the left side of the scanner heater is accessed from the scanner frame.

  6. Connect the connector [A] of the scanner heater to the machine ( x 1, x 2).