1. Separate the fusing unit into the upper part and the lower part. (Separating the Fusing Unit)
  2. Remove the fusing stripper plate unit. (Fusing Stripper Plate Unit)
  3. Remove the fusing belt smoothing roller. (Fusing Belt Smoothing Roller (Pro C5200S/C5210S Only))
  4. Turn over the upper part [A] of the fusing unit.
  5. Remove the gear [A], bracket [B] and screw [C] on the rear side.
  6. Remove the rotation sensor [A] and spring [B].
  7. Remove the gear [A] and C-ring [B].
  8. Remove the bracket [A] and C-ring [B].
  9. Remove the bracket [A].

  10. Remove the bracket [A] on the front side, and grounding plate [B].

  11. Remove the bracket [A].

  12. Remove the bracket [A].

  13. Remove the bracket [A] and C-ring [B].
  14. Turn back the upper part of the fusing unit, and remove the stay [A].
  15. Turn over the upper part of the fusing unit, and remove the entrance stay [A].
  16. Remove the bearings [A], and detach the fusing belt unit [B].

  17. Detach the hot roller [A] and the heating roller [B] from the fusing belt [C].

    • When you detach the rollers and the belt from the frame, hold the ends of the hot roller shaft to lift it. Then move it above the heating roller to detach the whole thing (hot/heating rollers and fusing belt).