1. Remove the transfer belt. (ITB Replacement)
  2. Remove the paper transfer belt separation sensor bracket [A].
  3. Remove the actuator [A].

  4. Remove the bracket [A] and the bearing [B].

  5. Loosen the fixing screws of the motor bracket [A].
  6. Remove the pulley [A].
  7. Remove the bearing bracket [A].
  8. Remove the bearing [A].
  9. Drop the ITB bias roller [A] down and remove the parallel pin [B].

  10. Pull the ITB bias roller [A] upward and release its lower end to remove it.