- Fasten the connecting bracket [A] to the left side of the upstream device. (M4x20)
Fasten the connecting bracket provided with the downstream device to the left side of the multi-folding unit, if a downstream device is going to be installed. (M4x14)
- Use the screws provided with the downstream device.
- Select the long entrance guide plate for the installation.
- Two entrance guide plates are provided.
- The short one is for another machine.
- If the upstream device is the Decurl Unit DU5020 (D727), attach the black mylar provided with the cover interposer tray (Cover Interposer Tray CI4040) or decurl unit to this entrance guide plate.
- If the upstream device is the main machine, prepare the guide sheet [A] provided with the main machine.
If the upstream device is not the main machine, proceed to step 8. - Divide the entrance guide plate [A] into two parts.
- Remove the release paper from the guide sheet [A], and attach the guide sheet to the side of the upper entrance guide plate [B] which becomes the inner side when assembled.
[C]: Position the edge of the guide sheet 5 mm inside from the edge of the upper entrance guide plate.
[D]: Align the edge of the adhesive tape with the edge of the upper entrance guide plate. - Reassemble the entrance guide plate [A].
- Attach the long entrance guide plate [A] to the left side of the multi-folding unit. (M3x6)
- Peel the tape from the sponge strip [B], and attach the strip to the top right edge of the multi-folding unit.