For MP C6503/C8003, a side fence support plate to help feed the paper straight can be installed in the paper tray.
This is provided as a service part for MP C6503/C8003. (The paper tray for Pro C5200S/C5210S is originally equipped with the side fence support plate.)
Accessories
| No. | Description | Q'ty |
|---|---|---|
| 1 | Plate Nut for Tray | 1 |
| 2 | Tapping Screw: 3x10 | 1 |
| 3 | Side Fence Support Plate | 1 |
| 4 | Screw: 2.5mm | 1 |
| 5 | Plate Nut Holder | 1 |
| 6 | Plate Nut for Side Fence | 1 |
| 7 | Spacer | 1 |
| 8 | Knob Screw for Support Plate | 1 |
| 9 | Knob Screw for Side Fence | 1 |
| 10 | E-Rings | 1 |
- Remove the cover [A] and handle [B] from the paper tray.
- Install the plate nut for tray [A] as shown below. (M3x10)
[B]: Insert the plate nut for the tray. - Install the side fence support plate [B] on the side fence [A]. (Screw: 2.5mm)
- Attach the plate nut for side fence [B] to the plate nut holder [A].
[C]: Cut-out in the nut
[D]: Insert in this direction
- Install the plate nut holder [A] on the side fence, so that the hook is at the front side and the bent part is at the rear side as shown below.
[B]: Bent part (rear side)
[C]: Hook (front side)
- Align the side fences gently against the stack of paper. Then secure the side fence support plate [A] by fastening the knob screw for the support plate [B].
- Attach the E-ring to the knob screw for the support plate.
- Place the spacer [A], and then secure the side fence by fastening the knob screw for the side fence [B].
- Attach the E-ring to the knob screw for the side fence.
- Put back the cover and handle removed in step 1.