Import device information saved on an SD card.

  1. Insert an SD card into the media slot on the side of the control panel.
  2. Enter SP mode.
  3. Press SP5-749-101(Import/Export: Import)

  4. Select a unique setting.

    • If you set "Device Unique Information" to [Exclude], the import of items categorized as the device unique information is skipped.

  5. Press [Encryption Key], if the encryption key was created when the file was exported.

  6. Select an encryption setting.

    Unique

    If you want to apply the unique information to the target machine, select the "Unique" key.

    Refer to the above information.

    Encryption

    If an encrypted file is selected as the import file, this setting is required.

  7. Press [Execute].
  8. Press [OK].

  • If import fails, you can check the log for the error. The log is stored in the same location as the exported device setting information file.