Printing a test pattern: SP2-109-XXX
After changing an SP value for registration or image adjustment, print a test pattern to check the adjustment result.
- Some of these test patterns are used for print image adjustments but most are used primarily for design testing.
- Do not operate the machine until the test pattern is printed out completely. Otherwise, SC will occur.
- Enter the SP mode.
- Select SP2-109-003 (Test Pattern: Pattern Selection).
Select the pattern number for print from the list, then press [OK].
No. Pattern No. Pattern 0 None (Default value) 13 Independent Pattern (4dot) 1 Vertical Line (1dot) 14 Trimming Area 2 Vertical Line (2dot) 15 Hound's Tooth Check (Horizontal) 3 Horizontal Line (1dot) 16 Hound's Tooth Check (Vertical) 4 Horizontal Line (2dot) 17 Band (Horizontal) 5 Grid Vertical Line 18 Band (Vertical) 6 Grid Horizontal Line 19 Checker Flag Pattern 7 Grid Pattern Small 20 Grayscale (Vertical Margin) 8 Grid Pattern Large 21 Grayscale (Horizontal Margin) 9 Argyle Pattern Small 22 2 Beam Density Pattern 10 Argyle Pattern Large 23 Full Dot Pattern 11 Independent Pattern (1dot) 24 All White Pattern 12 Independent Pattern (2dot) - When changing the density of the test pattern, select the density with SP2-109-006 (Test Pattern Density).
- Execute SP5-990-005 (SP print mode Diagnostic Report).
After checking the test pattern, SP2-109-003 must be set to "0: None".