Change the necessary settings for the following SP modes if the customer has made a service contract.

SP No.

Function

Default

SP5-930-001

Meter Click Charge

Enables or disables the meter click charge setting. ("1" ON,  "0" OFF)

When enabled ("1" ON):

  • The counter menu appears immediately after you push the "counter" key.
  • You can print the counter from the counter menu.

When disabled ("0" OFF):

  • The counter menu does not appear.
  • To check the counter, the technician must print the SMC report (SP 5-990).
"0": OFF

SP5-930-010

Meter Click Charge: PCU

Enables or disables the PM alert for the PCU. If this SP is enabled, an alert message is displayed when the PCU needs to be replaced."1": No alert

SP5-930-014

Meter Click Charge: Transfer Roller Unit

Enables or disables the PM alert for the transfer roller unit.

If this SP is enabled, an alert message is displayed when the transfer roller unit needs to be replaced.

"1": No alert

SP5-930-016

Meter Click Charge:

Fusing Unit

Enables or disables the PM alert for the fusing unit.

If this SP is enabled, an alert message is displayed when the fusing unit needs to be replaced.		"1": No alert

SP5-104-001 (SSP)

A3/DLT double count

Specifies whether the counter is doubled for A3/DLT paper.

"1": Double

counting

SP5-812-001 and -002

Service Tel: Telephone / Facsimile

-001: shows or sets the telephone number of the service representative.

-002: shows or sets the fax number of the service station. The number is printed on the counter list when the "Meter Click Charge" is enabled. Users can send the counter list as a fax message.

Installation is now completed.