1. Enter the SP mode.

  2. Output the SMC logging data with SP5-990-004.
    Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the latest settings may not be collected when the SMC is printed.
    Set the following SPs (New Unit Detection) to "1".

    Item

    SP

    PCU

    SP3-701-002

    Development Unit

    SP3-701-023

    Waste Toner Bottle

    (When the bottle is replaced before the machine detects bottle full and stops)

    		SP3-701-142
  3. Turn the main power switch OFF, and disconnect the power cord from the outlet.
  4. Replace the PM parts and turn the main power ON.
    The machine will reset the PM counters automatically. In the case of the development unit, developer initialization will also be done automatically.
  5. Exit the SP mode.