1. Prepare a formatted SD card.
  2. Make sure that the write-protection on the SD card is off.
  3. Turn OFF the main power.
  4. Remove the SD card slot cover [A] (Coin screw x 1).

  5. Insert the SD card into SD card slot 2 [A: Lower Slot].

  6. Turn ON the main power switch.
  7. Enter the SP mode.
  8. Do SP5-846-051 (Backup All Addr Book).
  9. Exit the SP mode, and then turn OFF the main power switch.
  10. Remove the SD card form the SD card slot 2 (lower).
  11. Install the SD slot cover.

  • If the capacity of SD card is not enough to store the local user information, an error message is displayed.
  • Make sure that the write protection of an SD card is unlocked.
  • Carefully handle the SD card, which contains user information. Do not take it back to your location.