Test Pattern Printing

Printing Test pattern: SP2-109

Some of these test patterns are used for copy image adjustments but most are used primarily for design testing.

1. Enter the SP mode.
2. Press SP2-109-001.
3. Select a test pattern from the list, and then press [OK].

4. To change the density of the test pattern, select the density with SP2-109-002, then press [#].

   

   • If the value of SP2-109-002 is 0, the color adjusted so will not show up in the test pattern.

5. To print, press [Copy Window], and then make settings within the copy window for the test print (paper size etc…).
6. Press [Start] to start the test print.
7. After checking the test pattern, press [SP Mode] on the screen to return to the SP mode display.
8. Reset all settings to the default values with SP2-109-003 and SP2-109-006.
9. Exit SP mode.