Before the scanner adjustment, do the Side-to-Side registration and blank margin width adjustment.

  • Use a test chart to adjust these settings.

Magnification

A: Sub-scan magnification

  1. Place the test chart on the exposure glass and make a copy from one of the paper feed trays.

  2. Check the magnification ratio. If necessary, adjust the magnification with the following SP mode.

    SP No.

    Name

    Specification

    SP4-008

    Sub-scan magnification

    ± 1.0%

Registration

  • A: Leading edge registration
  • B: Side-to-side registration
  1. Place the test chart on the exposure glass and make a copy from one of the paper feed trays.

  2. Check the leading edge and side-to-side registration, and adjust as necessary with the following SP modes.

    Name

    SP No.

    Specification

    L-Edge Regist Adjustment

    SP4-010-001

    0 ± 2mm

    S-to-S Regist Adjustment

    SP4-011-001

    0 ± 2.5mm