| Item | Remarks | |
|---|---|---|
| Destination | DFU [JPN/ NA/ EU / ASIA/ CHN/ TAIWAN] | |
| PnP ID | DFU | |
| Serial No | DFU | |
Main Motor Rotation Time | Displays the main motor rotation time. | |
| Charge Bias Setting | [1100 to 1300 / 1200* / 24/step] | |
Sub Scan Magnification | Adjusts the sub scan magnification. [-8 to 8 / 0* / 1 /step] | |
Development Bias Setting | Adjusts the developer bias. [270 to 330 / 250* / 15 /step] | |
| Transfer Roller Bias | Adjusts the transfer roller bias. [-6 to 6 / 0* / 1 /step] | |
| Interval Setting | Corrects the face curl of paper. 0: OFF (32ppm) 1: Sets the engine speed at half after printing 1 minute. 2: Sets the engine speed at 13ppm. [0 to 2 / 0* / 1 /step] | |
| PDL Menu | [On * or Off] | |
Settings between near empty and empty of Toner status | Printable Sheets | Adjusts the printable sheets between "toner near end" and "toner end". [0 to 255 / 200 / 1 sheet/step] |
| Printable Dot Count | Adjusts the printable dot count between "toner near end" and "toner end". [0 to 255 / 100 / 1 dot/step] | |
| Counter Information | Display the counter information. | |
| Clear Transfer Roller EM Counter | Clears the EM counter of the transfer roller. | |
| Clear Paper Feed Roller EM Counter | Clears the EM counter of the paper feed roller. | |
| Clear Fusing Unit EM Counter | Clears the EM counter of the fusing unit. | |
| Factory Default for Service | Resets all the settings to factory default. | |
| EM Life Display | Sets the alert display when each EM parts yield of this machine is reached. [On or Off *] | |
| Clear Engine Memory | Resets the engine settings stored in the EEPROM to factory default. | |
| Reset Fusing Unit SC | This menu is for resetting an SC related to a fusing error. | |
| Page Dot Coverage Info | Displays the number of pages printed with each coverage. | |
*: Default