When Installing the New Main Board

After replacing the main board, the following settings must be made correctly.

1. Enter the "Maintenance Mode", and set the SPs below;
   

   • Destination
     Four-line LCD models: SP menu > [Engine Maintenance] > [Destination]
     Touch panel models: SP menu > [Engine Service Setting] > [Destination]

     Destination	Machine Code	Setting Value
     NA	M0C3-17, M0C6-17, M0C4-17, M0C5-17, M0C7-17	1
     EU/AA	M0C3-27, M0C6-27, M0C4-27, M0C5-27, M0C7-27	2
     CHN	M0C3-21, M0C4-21, M0C5-21	4
     TWN	M0C3-19, M0C5-19	5

   • Serial No.
     Four-line LCD models: SP menu > [Engine Maintenance] > [Serial No.]
     Touch panel models: SP menu > [Engine Service Setting] > [Serial No.]

     

     Ask your supervisor about how to enter the "Maintenance Mode".

2. Do the registration adjustment (Registration Adjustment)

3. For @Remote models, make sure that the manual call can be performed.

   

   If the serial number is not input correctly, @Remote service cannot be connected.