• When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

  1. Open the right cover, and then remove the upper front cover [A].

    • When removing the upper front cover, release the hooks at the back of the cover.
    • Tilt the operation panel [B] upward to a horizontal position, and then remove the upper front cover [A].

  2. Remove the upper cover [A] of the upper front cover.
  3. Attach the corner cover [A] provided with this option.
    Use the screws removed in the previous step.
  4. Remove the scanner front cover [A].
  5. Remove the operation panel upper cover [A].
  6. Remove the operation panel right cover [A].
  7. Attach the ferrite core [A] to the cable as the picture below.
  8. Connect the USB connector, which does not have the ferrite core, to the operation panel.
  9. Hook the USB cable [B] in the notch [A].

  10. Reattach the operation panel right cover [A].

  11. Pass the USB cable [A] between the operation panel bracket [B] and the operation panel under cover [C].

  12. Reattach the operation panel upper cover [A].
  13. Pass the USB cable [A] through the hole in the upper front cover, and reattach the upper front cover [B].
  14. Attach the reader spacer [A].
  15. Connect the USB cable [A] to the reader, and attach the reader [B].

  16. If the USB cable is sticking out, put the cable inside the upper front cover.

    • The cable [A] should be placed in the lower area in the left side.

  17. Attach the reader cover [A].

  18. Reattach the removed covers.