1. Place the paper feed unit [B] on the caster table [A].
  2. Pull out the paper feed tray of the PB3150.
  3. Using a securing bracket, fix the caster table to the paper tray unit (spring washer: screw: M4×10: 1).
  4. Attach the securing brackets at 2 positions to left and right at the rear of the machine (screws: 1 each).
  5. Put back the tray of the PB3150 in place.

  6. By holding the grips on the main machine, mount the main machine on the PB3150 while fitting it to the locating pins [A].

    • Be sure to use the specified grips on the main machine. Using any other positions may damage the machine.
    • Do not put the machine down on the PB3150 as a temporary resting place. This may cause the PB3150 to deform.

  7. Pull out the 2nd paper feed tray of the main machine.
  8. Using a securing bracket as a screwdriver, secure the main machine and the PB3150 (M4×10: ×1).
  9. Attach the securing bracket [A] to the rear of the main machine.
  10. Attach the rear lower gap cover [A] (×2).
  11. Return the 2nd paper feed tray to the main machine.