Before Replacing the Waste Toner Bottle

When the bottle is replaced after the machine detects that the waste toner bottle is full and stops, the counter for the Waste Toner Bottle is reset automatically.

When the bottle is replaced before the machine stops due to a full bottle, it is necessary to reset the PM counter manually (set SP3-701-142 to “1” before replacing the bottle, then switch the power off).

SP3-701 (Manual New Unit Set)

This SP is the new unit detection flag.

0: new unit detection flag OFF, 1: new unit detection flag ON

Item

SP

Waste toner bottle

SP3-701-142

 

  1. Open the front cover.

  2. Pull out the waste toner bottle [A] (x1, ×1).

    • There is no waste toner bottle set switch. If you remove the waste toner bottle, be sure to replace it before you finish work on the machine.