Check the side-to-side registration by exiting to the proof tray. Print out an A3 or DLT sheet to the proof tray. Using the markings on the front-most exit roller, check to see where the paper edge is located when the paper is fed out. For purposes of accuracy, print out about 5 sets. If side-to-side registration shift occurs, see the Troubleshooting section and make adjustments (Other Problems).

[A]: Scale marks for DLT

[B]: Scale marks for A3

[C]: 7 scale marks at 2mm intervals

[D]: Center mark

  • Each marking represents 2mm.
  • If the paper edge is lined up with the center marking, this means the paper is aligned correctly.
  • If the paper edge is lined up with any marking to the right of center, this means the paper is shifted toward the front.
  • If the paper edge is lined up with any marking to the left of center, this means the paper is shifted toward the rear.