- After adjusting the Leading Edge Registration and Side Registration settings (see the previous section), do the Blank Margin Adjustment. To do this, check the values of Margins C and D.
- If they are not within the specifications (see below), then adjust C and D with SP2-103-001 to -020 as explained below. Then check Margins A and B again.
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
- Check the trailing edge [A], right edge [B], leading edge [C], left edge [D] blank margins, and adjust them using the following SP modes.
Edge | SP No. | Adjustment Range |
|---|---|---|
Leading Edge | SP2-103-001 | 4.2 ± 1.5 mm (Plain, Thin) |
Trailing Edge | SP2-103-002 | More than 0.5 mm |
Left Edge | SP2-103-003 | 2.0 ±1.5 mm |
Right Edge | SP2-103-004 | 2.0 +2.5 /-1.5 mm |
Duplex: Trailing Edge: L Size: Plain | SP2-103-006 | 2.0 ±2.0 mm |
Duplex: Trailing Edge: M Size: Plain | SP2-103-007 | |
Duplex: Trailing Edge: S Size: Plain | SP2-103-008 | |
Duplex: Left Edge Plain | SP2-103-009 | -2.0 ±1.5 mm |
Duplex: Right Edge: Plain | SP2-103-010 | 2.0 +2.5 /-1.5 mm |
Duplex: Trailing Edge: L Size: Thick | SP2-103-011 | 2.0 ±2.0 mm |
Duplex: Trailing Edge: M Size: Thick | SP2-103-012 | |
Duplex: Trailing Edge: S Size: Thick | SP2-103-013 | |
Duplex: Left Edge Thick | SP2-103-014 | -2.0 ±1.5 mm |
Duplex: Right Edge: Thick | SP2-103-015 | 2.0 +2.5 /-1.5 mm |
Duplex Trail. L Size:Thin | SP2-103-016 | -4.0 ± 4.0 mm |
Duplex Trail. M Size:Thin | SP2-103-017 | |
Duplex Trail. S Size:Thin | SP2-103-018 | |
Lead Edge Width:Thin | SP2-103-019 | 0.0 ± 9.9 mm |
Trail. Edge Width:Thin | SP2-103-020 |
- L Size: Paper Length is 297.1 mm or more
- M Size: Paper Length is 216.1 to 297 mm
- S Size: Paper Length is 216 mm or less.