- Attach the 3 locating pins.
Holding the grips on the machine, align it with the locating pins, and place the machine on the caster table.
- When you lift the machine, hold the lifting handles.
- In particular, do not lift it by holding the scanner unit, etc., (as it may deform).
- Do not put the machine down on the caster table as a temporary resting place. This may cause the machine to deform. Always connect the machine and caster unit properly.
- Attach the right lower cover between the right side of the main machine and the caster table.
- Pull out the 2nd paper feed tray of the machine.
- Using a securing bracket as a screwdriver, fix the machine or paper feed unit to the caster table (spring washer: screw: M4×10: 1).
- Attach the securing brackets [A] at 2 positions to left and right at the rear of the machine or paper feed unit (screws: 1 each).
- Attach the right lower cover provided with this option to the right lower side of the main machine.
- Return the paper feed tray to the machine or the paper feed unit on the caster table.