This section shows you how to manually move the machine from one floor to another floor. Before turning off the main power, make sure 100% is shown as available memory on the screen if the fax option is installed.

  • Move the scanner carriage to the correct position [A] with SP4-806-001 (Super SP mode), and reattach the scanner shipping locks at the lock position [B].
  • Turn off the main power.

  • Disconnect the power plug from the outlet.

  • Close all covers and paper trays, including the front cover and bypass tray.
  • Remove the optional feed tray when lifting the main machine for moving it to another floor.
  • Keep the machine level and carry it carefully, taking care not to shake or tilt it, and protect the machine from strong shocks.

  • When moving the machine, do not press against the ADF.

    • Do not push the center part of the rear cover. Do not hold the covers of the stabilizers.
    • Do not put hard pressure on the rear cover [A] when moving or picking up the machine as it is fragile. This also applies to the operation panel [C]. Hold the areas [B] when moving the machine.
    • Hold 4 corners on the bottom base when holding the machine with the optional paper feeding tray joined to the main machine. Do not hold any other parts.