- Check the jogger width in the exposure glass reading mode.
- If a paper alignment problem occurs as below, do the following procedure to adjust the jogger width.
- Place an A4 original (SEF) on the exposure glass.
- Select [Staple] on the operation panel (you can select any staple location: top or bottom.)
- Press [Start].
- A copy is put out on the staple tray. Put the copy next to the bottom jogger [A].
- Measure the distance between the aligning side of the top jogger and the edge of the copy with a scale.
- Press the [#] button.
Adjust the jogger width with SP6-143-004 (adjustable threshold: -1.5 to +1.5 mm for each paper size).
SP6-143-004 (Jogger Pos Adj:1K FIN)- Adjust the jogger width to be slightly narrower (approximately -0.5 mm) than the paper width.
Repeat step 3 through step 6 to make the jogger width same as the paper width.