Attaching the Proof Support Tray

Explain the following information to the users.

The sensor may detect that the exit tray is full prematurely when delivering z-folded sheets or curled paper to the tray.

If a message reporting a full paper exit tray appears, the job is suspended until the paper is removed from the paper exit tray. By attaching a support tray, you can prevent the premature full detection. 

Proof Support Tray ("1" marked on the back), provided with this finisher

When using B4, LG or larger paper, or when using limp paper, the sheet may become bent, resulting in premature full detection.

This can be solved by attaching the proof support tray [B] on the proof tray [A].

Problem that may occur after attaching this support tray:

When printing A4, LT or smaller paper with the support tray, the machine stacks only 200 sheets, which is less than the standard specification of 250 sheets.

When printing B4, LG or larger paper with the support tray, the machine stacks 50 sheets, which is the same as the standard specification.