When using mixed mode, with duplex (curls downwards) over simplex (curl upwards) and paper curl occurs, attach the auxiliary tray (D7667010), disable the tray full detection sensor, and paste the mylar.

  1. Paper output cover [A] (×2)
  2. Release the clamp and disconnect the harness of the paper exit full sensor 1 [A] (x1,x1).
  3. Loop and clamp the harness [A] as shown (x1).
  4. Release the clamp and disconnect the harness of the paper exit full sensor 2 (Staple) [A] (x1,x1).

  5. Loop and clamp the harness [A] as shown(x1).

    • If the harness cable [A] is too short to loop, clamp the harness without looping (x1).

  6. Re-attach the paper output cover (×2)
  7. Attach the auxiliary tray (D7667010) [B] to the paper output tray [A]
  8. Paste the mylars [A] on the frame of the finisher.